2003 F150 Harley Davidson SC

[bigbubba]

I am redoing the install in my F150 HD truck. I don't want to have to go through the process of explaining the whole thing since I pulled out everything except the HU so the link below takes you to that other site to show the first iteration.

http://www.diymobileaudio.com/forum/...elaborate.html

The truck


List of what's going in it.
Pioneer P800
Helix dsp
Phoenix Gold DD-10
Pioneer TS-C720PRS 1" tweet 6 3/4"midbass
Pioneer TS-062PRS mids
JBL GTO1020D 10" sub4
JL Audio HD 900/5
JL Audio HD 600/4

On with the update. Used the existing subbox/ amprack and added sides that allowed for adding another amp.

[bigbubba]

[bigbubba]

Had to make some rca's to go from the Helix to the amps.


A quick pic of the front speakers


The Helix is going under the rear driver seat


The DD-10 is going under the rear passenger seat as well as the fuse holder/ground block

[bigbubba]

Pods almost done. Still need to attach to the sail panels and wire them up.

[BigAl205]

You can't build RCA's without Nutter Butters!

Outstanding job! I like the cascading amp rack.

[erinh]

agreed on the amp rack. that looks sweet! is it going to be lit up?

[bigbubba]

Got a lot more done today on the subbox/ amp rack. Got the locations set for the exhaust fans on top of the box to be used to pull air from the amps.


Mounted the rear panel of the box the wiring will be coming through.


Will be covering the box in vinyl and carpet. Vinyl should be here tomorrow. Since the box is square the vinyl will not wrap too far around the sides I made a transition spot for the carpet and vinyl to blend. Hopefully it works out. I used cardboard and bondo to make that.

[bigbubba]

I'll have an led strip at the front above the grill facing back at the amp and another one at the rear facing forward, I think. I know the one up front will be there but the one in the back may be too much I will have to test it to see if I like them both.

[bigbubba]

You can't build RCA's without Nutter Butters!

Outstanding job! I like the cascading amp rack.

That's right! Building rca's is serious business. Can't take any short cuts.

[Kevin K]

Great work. Looking forward to seeing and hearing this in person.