...and all done on that piece.
Process: removed ash tray, bonded in place, sanded and then applied filler, sanded/spot filled/sanded more. Hit it with some poly primer, sanded smooth and then hit it with SEM texture coat. After that I used a scotch pad to knock down any high spots and then followed it up with SEM Trim Black. I also did the cup holder piece that it butts up against to keep a uniform look.
(the white specs you see in the pic above is simply some dust and isn't in the finish).
Looks like it was made that way
Sent from my iPhone using Tapatalk
MASQ partner and judge
MobileAudioSQ.com
That looks awesome!
2002 330Ci & 2020 Tacoma
Great work, Captain!
Looks good
Thanks fellas! Have to do the source unit next. The aftermarket kit is a double din opening only with one of those pockets, so I need to modify the piece and make it look a lot better for a single.
Made some progress on the dash piece for the source unit.
Typically, these kits are a boring plastic piece with a double din cutout and if you want to use a single din unit, you get an ugly pocket to be the piece that takes up the extra space. I wanted something a little nicer, so I rebuilt the piece.