Thanks Jay for a nice words!
that car you are talking about was Alfa Romeo 147….
here is the link… if not appropriate please delete
https://www.diymobileaudio.com/threa.../#post-2162320
Thanks Jay for a nice words!
that car you are talking about was Alfa Romeo 147….
here is the link… if not appropriate please delete
https://www.diymobileaudio.com/threa.../#post-2162320
FOR FAST MOVING CONCERTS
Team LBaudio
Team BRAX
Team SCB
Team Car Audio Lab
EMMA SLO head
heres a few pics of some final touches to the pillars - added Silent Coat damping material on back side of the pillar and covered it with fabrics, also a thin layer of Brax paste was added inside of panels - thin because there was almost no space due to needed magnet clearance. There were also added strips of neoprene to decouple insert from the pillar, Neoprene strip was added to the speaker ring too. everything packed up and ready to ship. Heres a last few pics:
Silent Coat damping on the back of pillar, covered with fabrics
Sealant/decoupler - a thin stripe of neoprene was added on the back side of the insert to decouple insert from pillar, to seal it,....
a small ammount of BRAX ExVibration paste was added to the inside of the panel among with some other damping materials
Everything packed and ready to ship
FOR FAST MOVING CONCERTS
Team LBaudio
Team BRAX
Team SCB
Team Car Audio Lab
EMMA SLO head