Welcome to my build for my 2018 F150. Supercab.This is my first big build. I am posting this to get advice and tips.
Components:
Speakers:
Audiofrog GB 60 front doors. These were used. The green +/- label had fallen off. Andy sent me a replacement even though I bought them used. Didnt charge me. Frog customer for life.
GB25 Sails. MTI has them right now, making my panels.
GB10 A-pillar.
Mobile Toys gave me great prices on the frogs.
Sub:
JL12W7 (1)
Enclosure was designed for me by Pete at Audio Dynamics.
He did a great job. It hits low and flat.
https://adcaraudio.com/store/enclosure-design-service/
My single rear seat is gone to make room for the sub.
I built the enclosure. Didnt do too bad. Hard to cut perfectly straight.
Source:
Sync HU, DSP408 and Tidal from my phone via android auto.
Amps:
GB60: Old School Phoenix Gold M100 I recapped. A buddy gave me this amp.
Here you can see the caps I removed and signs they were leaking.
Caps replaced, fingers crossed!
Yay no smoke and it works!
More watts than I need, but class AB old school amazing amp.
Anyone like Amp Dynos?
https://youtu.be/w6WifBuyRjg
GB25 and GB10: Sony GS4.
Here is the Sony meeting the DSP408 for the first time.
These Sonys were $150 for awhile at sonic. Crazy price.
https://www.sonicelectronix.com/item...Amplifier.html
I figured I would try it since it won some amp shootout and it is cheap.
Shootout article:
https://www.dropbox.com/s/ttqllik75s...otout.pdf?dl=0
12W7: DC 2.0k. I wanted some room in case I add a second 12W7. I lika da bass.
I clamped this amp at 930 watts into the 3 Ohm W7.
Dyno: https://youtu.be/YvnN3QABYlo
Steve Meade Vid on it:
https://youtu.be/_lBxAYQbB1c
Sound treatment:
Secondskin! I did the entire floor except under the center console. It is not easy to remove and since full coverage is not needed, I said screw that.
I did the back wall too... and both side walls where the seat belts mount.
Continued tomorrow! That is enough for one post.