Hi guys, so with Helix DSP Tool 4.70 beta there's a new function called Auto TA.
- ATM - The official public beta version of "Automatic Time Measurement" has been added. This is a completely new algorythm and function which allows the user to fully automatically set up the time alignment in a car for all speaker channels indepentend if these are active or passive speaker systems. The new function can be accessed by pressing "SHIFT" + "t" in any window. To use the function name ALL inputs and outputs correctly, make sure that a fullrange stereo signal is routed to analog input channels "A & B" or in case of VCP to Virtual Channels "Front Left" and "Front Right" and play the ATM test track from the SoundFiles folder. The microphone needs to be mounted in a fixed position at the the centered head position e.g. mounting the mic to the headrest facing upwords or in a 45° angle to the inner roof. At last make sure that the measurement volume is in the green/good marked area of the microphone level bar and click on the "Start" button. If necessary it is possible to select/unselect specific channels in the table of the new window.
Wondering if anyone has used this and want to share their results. Hopefully in time someone posts a video going through the process.