Can i stack CLD

[Theslaking]

Dumdum - I'm not calling you out or anything. After re-reading my post could sound like that.

I'm interested. There was a time when I only used full coverage of CLD. But someone told me it was next to worthless (considering time and cost) so I tried using less. Measured and found that to be true.

[dumdum]

Dumdum - I'm not calling you out or anything. After re-reading my post could sound like that.

I'm interested. There was a time when I only used full coverage of CLD. But someone told me it was next to worthless (considering time and cost) so I tried using less. Measured and found that to be true.

It’s all good bud, I didn’t take it as you were, just my take on your input, forums are for discussion, I don’t do right and wrong as such as there’s more ways to skin a cat so to speak!

i love a chat about old school db drag days, i was the first guy from the U.K. to take a 1st in a European competition at sinsheim in 2004... then I judged at the finals in Cleveland in 05, was a fun year, then I got serious and got to third/fourth in the world behind VS audio and the finnish street max 1-2 In 2007/2008, I think I ended up fourth in the world that year on the stats as VS got entered twice somehow I’m all sq’d Up and full on now aiming for next years 2019 finals that will probably now be next March after this march got cancelled

[dTor]

You can, but the cost-to-benefit ratio really drops when you start adding a second layer. If you have some extra laying around after a project (like I just did), it can help a little to reinforce the really bad areas. I just wouldn't go and buy double what you really need. Just get a good quality CLD to start with and you will be fine.

[Pb82 Ronin]

As much as it is going to suck to do...I'd put in the work and gut the low quality stuff. It will only cause you headaches down the road. Heat guns, rubbing alcohol, WD-40, goo gone, and some elbow grease go a long way.

[ckirocz28]

As much as it is going to suck to do...I'd put in the work and gut the low quality stuff. It will only cause you headaches down the road. Heat guns, rubbing alcohol, WD-40, goo gone, and some elbow grease go a long way.

I think it would be better to burn the car and get another one.

[Justin Zazzi]

I think it would be better to burn the car and get another one.

I tried this once. I think fire is the way to go.

[Jscoyne2]

CRC, heatgun, and a putty knife did wonders.