I was reading the audiofrog tuning guide and not sure I understood the ideas listed for setting sub crossover 1/2 octave lower than midbass.
I have a 12" sub (SWS12D4 ported), NVX XSP65 mids, and nvx VSPTW Tweeters and trying to get a good starting point for crossovers.
DSP: original mosconi 6to8
This is what I am thinking I need:
sub: LR-12+LR-12 High Pass 20, Low Pass 80
mid: LR-12+LR-12 high Pass 100, low Pass 2500
twe: LR-12+LR-12 high pass 2500
My thoughts were that I would get a flat response with 10db boost below 60hz (unless i misunderstood the audiofrog tuning guide)