Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: 12vTools (Joey C. or g0a)

  1. Back To Top    #11
    Gene pool bobditts's Avatar
    Real Name
    Bob
    Vehicle
    2007 Exploder XLT
    Posts
    725
    Join Date
    Jul 2014

    Re: 12vTools (Joey C. or g0a)

    so what you are saying is you like to tap dat ass? Its a shame all that stuff will be neglected for several months in your absence.
    Follow me on Instagram at #bobditts

  2. Back To Top    #12

    Re: 12vTools (Joey C. or g0a)

    bringing this back up...

    Have any of you guys used the flex templates? Any feedback?

  3. Back To Top    #13
    Gene pool bobditts's Avatar
    Real Name
    Bob
    Vehicle
    2007 Exploder XLT
    Posts
    725
    Join Date
    Jul 2014

    Re: 12vTools (Joey C. or g0a)

    they work pretty good. You have to make sure you use a plastic bearing on your flush trim bit or you will burn the template. I know Joey sells some kits with the template, bit (with euro bearing), and template tape for a decent price.
    Follow me on Instagram at #bobditts

  4. Back To Top    #14
    Owner BigAl205's Avatar
    Real Name
    Alan
    Location
    Hayden, AL
    Vehicle
    2018 Chevy Silverado Z-71
    Posts
    5,343
    Join Date
    Feb 2013

    Re: 12vTools (Joey C. or g0a)

    I wonder how they compare to these http://www.amazon.com/gp/product/B00...lutyp_wish_1_4

  5. Back To Top    #15

    Re: 12vTools (Joey C. or g0a)

    My main concern is having something that will hold its shape when I remove it from the car. I don't necessarily need it to be a router guide; I can trace it and cut with a jigsaw. I just want something that will allow me to shape out odd patterns and hold its shape when I take it from the car to the wood.

  6. Back To Top    #16
    Senior Member
    pocket5s's Avatar
    Real Name
    Robert or Mac
    Location
    Oklahoma
    Vehicle
    2012 Charger RT
    Posts
    699
    Join Date
    Apr 2013

    Re: 12vTools (Joey C. or g0a)

    You might want a contour gauge instead. $10 and up depending on the length.

    Mostly used in Autobody world where they need to match panels from side to side when shaping, but works well for what you are wanting to do


    Sent from my iPhone using Tapatalk
    MASQ partner and judge
    MobileAudioSQ.com

  7. Back To Top    #17
    Gene pool bobditts's Avatar
    Real Name
    Bob
    Vehicle
    2007 Exploder XLT
    Posts
    725
    Join Date
    Jul 2014

    Re: 12vTools (Joey C. or g0a)

    Quote Originally Posted by erinh View Post
    My main concern is having something that will hold its shape when I remove it from the car.
    you want one of these then.... http://www.uafproducts.com/reaction-pattern-generator/ dave got one and i was playing with it a bit. It holds shape exactly. Its basically a flexible hard rubber with metal inside to keep its shape.
    Follow me on Instagram at #bobditts

  8. Back To Top    #18

    Re: 12vTools (Joey C. or g0a)

    That looks good but not long enough unfortunately. (TWSS!!!)

    Well, probably long enough for just the kicks but if I'm spending that much money it would be nice to have something longer for future potential use in the trunk.

  9. Back To Top    #19
    Gene pool bobditts's Avatar
    Real Name
    Bob
    Vehicle
    2007 Exploder XLT
    Posts
    725
    Join Date
    Jul 2014

    Re: 12vTools (Joey C. or g0a)

    how long do you need it to be to satisfy your needs?
    Follow me on Instagram at #bobditts

  10. Back To Top    #20
    Noob Salami's Avatar
    Real Name
    Rich
    Location
    North Carolina
    Posts
    246
    Join Date
    Jul 2013

    Re: 12vTools (Joey C. or g0a)

    Quote Originally Posted by bobditts View Post
    how long do you need it to be to satisfy your needs?
    Awkward question.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top