Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Weldwood Contact Cement or 3M Type 77 for attaching vinyl to pillars?

  1. Back To Top    #21

    Re: Weldwood Contact Cement or 3M Type 77 for attaching vinyl to pillars?

    heat in general will reactivate the glue.

  2. Back To Top    #22
    Noob naiku's Avatar
    Location
    VA
    Vehicle
    Swedish Wagon
    Posts
    469
    Join Date
    Dec 2015

    Re: Weldwood Contact Cement or 3M Type 77 for attaching vinyl to pillars?

    Your comment confirms what I was wondering, if heat reactivates the glue and say in the summer, the car is getting to 100F+ in the heat, coupled with the vinyl being stretched in order to not be wrinkled, is the heat re-activating the glue enough that the vinyl is pulling away. The reason the drivers side is not doing it, is because it has the wrinkles and was likely not stretched as much as the passenger side.
    Another white wagon.
    Instagram - eye_take_pix



  3. Back To Top    #23
    Owner BigAl205's Avatar
    Real Name
    Alan
    Location
    Hayden, AL
    Vehicle
    2018 Chevy Silverado Z-71
    Posts
    5,352
    Join Date
    Feb 2013

    Re: Weldwood Contact Cement or 3M Type 77 for attaching vinyl to pillars?

    Did you prime the piece before wrapping it? IIRC, trying to stick vinyl to un-primed sanded filler is like trying to tape a piece of paper to a pile of dust.

  4. Back To Top    #24
    Noob naiku's Avatar
    Location
    VA
    Vehicle
    Swedish Wagon
    Posts
    469
    Join Date
    Dec 2015

    Re: Weldwood Contact Cement or 3M Type 77 for attaching vinyl to pillars?

    Interesting, I did not do anything specific, ran a piece of sandpaper over the whole thing and then wrapped it. But, that makes it all the more strange that it is just the one piece refusing to stick, maybe that got contaminated with something.

    Can't do anything with it for a while anyway, not only is it insanely humid, but the car is broken down at my in-laws... blew the high pressure power steering line yesterday in town and apparently the part is on back order.

    Edit: so the heat + glue + vinyl is not working, car has been parked outside at my in laws waiting on parts. Called in there today and the vinyl is peeling off both pillars. Had a demo in Jason's S4 today and was looking at the flock on his pillars so leaning that way. But I might also look at SEM texture and match then to the sails. Either way the vinyl is basically coming off whether I like it or not at this point.
    Last edited by naiku; 07-14-2023 at 10:31 PM.
    Another white wagon.
    Instagram - eye_take_pix



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top