Ok so that took longer than planned but worked out just as we worried the rear deck was to thin to weld 1.5" x 1.5" x 1/4" angle iron to. So plan B weld corners to deck and then bolt across with 5/16 bolts and nylon insert nuts on the frame top to rear deck. The vertical frame braces were welded to the top and bottom angle iron frame as well as the car frame. We added a doubled up center brace. Needless to say it is solid. Should help with the tactile sound element. This is getting fun! ! :-) :-)
Sent from my SGH-T989 using Tapatalk