Page 4 of 4 FirstFirst ... 234
Results 31 to 35 of 35

Thread: Helix P-SIX - EQ Linking Help

  1. Back To Top    #31
    Noob Cathul's Avatar
    Real Name
    Peter
    Location
    Leipzig, Germany
    Vehicle
    Ford Mustang GT Premium
    Posts
    136
    Join Date
    Apr 2020

    Re: Helix P-SIX - EQ Linking Help

    Quote Originally Posted by dumdum View Post
    The timing driver doesn’t matter, you generally use a passenger side mid That works for all the drivers, you just tell rew to use the passenger mid as an output and set the routing to suit so the passenger mid is timing channel and the rest of the drivers are run from right outputs, inc left midbass and left tweeter, you basically time every driver to the one mid that plays the chirp everytime
    And then there are DSPs like most Mosconi DSPs where you cannot do that.

    Click image for larger version. 

Name:	Bildschirmfoto 2021-04-23 um 08.08.15.png 
Views:	154 
Size:	59.0 KB 
ID:	15652

    But... in REW you can choose in the measuring dialog which is your output channel (left, right or left+right) and your reference channel (left or right).
    SYNC3 headunit
    Mosconi Pico 8/10 DSP
    Mosconi D2 500.1
    Gladen Zero Pro 165.3 DC
    JL Audio 10w3v3 in custom enclosure (Blueprint by Mark @Caraudiofabrication)

  2. Back To Top    #32

    Re: Helix P-SIX - EQ Linking Help

    Quote Originally Posted by Cathul View Post
    And then there are DSPs like most Mosconi DSPs where you cannot do that.

    Click image for larger version. 

Name:	Bildschirmfoto 2021-04-23 um 08.08.15.png 
Views:	154 
Size:	59.0 KB 
ID:	15652

    But... in REW you can choose in the measuring dialog which is your output channel (left, right or left+right) and your reference channel (left or right).
    So use 1 and 2 for left inputs and 3 and four for right inputs... but yet again helix shows why it’s the king

  3. Back To Top    #33
    Noob Cathul's Avatar
    Real Name
    Peter
    Location
    Leipzig, Germany
    Vehicle
    Ford Mustang GT Premium
    Posts
    136
    Join Date
    Apr 2020

    Re: Helix P-SIX - EQ Linking Help

    No, because 1+2 is left and right tweeter f.e.
    so you have either input 1+2 for left and right tweeter or 3+4 for left and right tweeter. You cannot assign input 1 to output 1 and input 3 to output 3 f.e.
    Doing left tweeter and left midrange on output 1+2 would mean you share the EQ for both as you don't have channel independent parametric EQ on the older DSPs from Mosconi as well. (bummer!).
    You don't have channel independent routing like with the HELIX DSPs.
    SYNC3 headunit
    Mosconi Pico 8/10 DSP
    Mosconi D2 500.1
    Gladen Zero Pro 165.3 DC
    JL Audio 10w3v3 in custom enclosure (Blueprint by Mark @Caraudiofabrication)

  4. Back To Top    #34

    Re: Helix P-SIX - EQ Linking Help

    Quote Originally Posted by Cathul View Post
    No, because 1+2 is left and right tweeter f.e.
    so you have either input 1+2 for left and right tweeter or 3+4 for left and right tweeter. You cannot assign input 1 to output 1 and input 3 to output 3 f.e.
    Doing left tweeter and left midrange on output 1+2 would mean you share the EQ for both as you don't have channel independent parametric EQ on the older DSPs from Mosconi as well. (bummer!).
    You don't have channel independent routing like with the HELIX DSPs.
    sounds like a good excuse to upgrade...

  5. Back To Top    #35
    Noob Cathul's Avatar
    Real Name
    Peter
    Location
    Leipzig, Germany
    Vehicle
    Ford Mustang GT Premium
    Posts
    136
    Join Date
    Apr 2020

    Re: Helix P-SIX - EQ Linking Help

    Tell that to my wife
    SYNC3 headunit
    Mosconi Pico 8/10 DSP
    Mosconi D2 500.1
    Gladen Zero Pro 165.3 DC
    JL Audio 10w3v3 in custom enclosure (Blueprint by Mark @Caraudiofabrication)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top