Results 1 to 7 of 7

Thread: Rockford Fosgate PLC not working

  1. Back To Top    #1
    Senior Member Smitty's Avatar
    Location
    FL
    Vehicle
    2019 Toyota 4Runner, 2019 Toyota Camry
    Posts
    271
    Join Date
    Oct 2019

    Rockford Fosgate PLC not working

    I have a Punch 300 mono for a single 10" sub. I've had it for a while but never installed it. I have the PLC2 installed in the console. The rest of the amplifier works very well and the light on the level control comes on and changes color; however, there is no change in the level when the knob is rotated. I'm well past the return period and don't want to waste another $30 if the circuit in the amp is bad.
    Does anybody know how to troubleshoot without another unit of either available to swap?
    Meh, it'll play.

  2. Back To Top    #2

    Re: Rockford Fosgate PLC not working

    First, the plc needs to be in the propper port, the " in " port.
    Second , the xover contols need to be set to " LP " ( low pass ).
    Third, the punch dial needs to be set above zero.

    Double check all these things and report back. ��

  3. Back To Top    #3
    Senior Member Smitty's Avatar
    Location
    FL
    Vehicle
    2019 Toyota 4Runner, 2019 Toyota Camry
    Posts
    271
    Join Date
    Oct 2019

    Re: Rockford Fosgate PLC not working

    Thank you! It was the crossover. I'm using a dsp so I had it set to pass.
    Meh, it'll play.

  4. Back To Top    #4

    Re: Rockford Fosgate PLC not working

    Awesome !

  5. Back To Top    #5

    Re: Rockford Fosgate PLC not working

    Quote Originally Posted by Lurch View Post
    First, the plc needs to be in the propper port, the " in " port.
    Second , the xover contols need to be set to " LP " ( low pass ).
    Third, the punch dial needs to be set above zero.

    Double check all these things and report back. ��

    I have the punch 1000 mono and my plc2 isn’t working either I have it in the “in” but I don’t see a low pass on my amp it works fine when I have the plc2 switched off on the amp but nothing when it’s switched on also the light is working on the remote so I know There is a connection….

  6. Back To Top    #6
    Wave Shepherd - aka Jazzi Justin Zazzi's Avatar
    Location
    Northridge, CA
    Posts
    670
    Join Date
    Aug 2018

    Re: Rockford Fosgate PLC not working

    The Rockford tech support guys are pretty helpful. They help me all the time!
    Try giving them a call.

    https://rockfordfosgate.com/support/
    Measure with mics, mark with chalk, cut with torch, grind to fit, sand to finish, paint to match.
    Updated Justin tuning sheet (Justin and Erica tuning companion for SMAART and REW)
    Do it for them.

  7. Back To Top    #7

    Re: Rockford Fosgate PLC not working

    Quote Originally Posted by Justin Zazzi View Post
    The Rockford tech support guys are pretty helpful. They help me all the time!
    Try giving them a call.

    https://rockfordfosgate.com/support/
    thanks man!!! I’ll try to reach out to them after work today!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top