Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Some Advice

  1. Back To Top    #21

    Re: Some Advice

    would i get away with using the sock tweeter location for the U2 or L2SE firing up on to the screen or better to have them in the pillar on axis. i think am leaning onto getting the DSP.3 and the wideband but am looking the keep the tweeters in the build incase
    i need them for the top end i could keep the DSP mini and go tweeter-less spend time in getting them right but i think it might be a better idea to have the DSP.3 and the tweeter to fall back on? with me being in NI there is not many i know that have gone tweeter-less

    Click image for larger version. 

Name:	IMG_20200923_164646409_HDR.jpg 
Views:	8 
Size:	175.2 KB 
ID:	13945 Click image for larger version. 

Name:	IMG_20200923_164652307_HDR.jpg 
Views:	8 
Size:	240.4 KB 
ID:	13946

  2. Back To Top    #22

    Re: Some Advice

    These where my Morel PG tweeters i had in before i got the morel piccolo installed.

    Click image for larger version. 

Name:	IMG_20191023_171519162.jpg 
Views:	7 
Size:	185.8 KB 
ID:	13947Click image for larger version. 

Name:	IMG_20191110_153013160.jpg 
Views:	7 
Size:	105.4 KB 
ID:	13948

  3. Back To Top    #23
    Noob Jdunk54nl's Avatar
    Real Name
    Jacob
    Location
    Phoenix
    Vehicle
    2014 F150 Limited
    Posts
    463
    Join Date
    Oct 2019

    Re: Some Advice

    Best bet is to test and see. A lot of people have had success and a lot of people haven't. The people that I have seen that had success have put quite a bit of effort to test fitting different angles/heights.
    2014 F150 Limited -> Factory HU programmed for 4v outputs -> Helix DSP.2 -> Alpine PDX-V9 -> SI M25 in Valicar Stuttgart Pods, Rear SB17's, Sub BM MKV's in MTI BOX. Alpine PDX-F6 -> Peerless SLS 6.5", SI M3 in Valicar Stuttgart Pods

  4. Back To Top    #24

    Re: Some Advice

    i dont mind trying a few things but am not sure if i should get the U2 or the L2SE i dont want to be buying both and find out ect, or should i drop in the L3SE in the pillar on axis and try and fit the tweeter in as a back up, the other thing i was looking at was
    the getting the alloy pods for the HAT but they need plenty of air space but if i get the L2SE they would fit in my builds now with a few adjustments and get a set of pods for the tweeters that might be something that would work out.

  5. Back To Top    #25
    Noob Jdunk54nl's Avatar
    Real Name
    Jacob
    Location
    Phoenix
    Vehicle
    2014 F150 Limited
    Posts
    463
    Join Date
    Oct 2019

    Re: Some Advice

    What about the gs25?

    As far as the U2 or L2SE, the latter is the better speaker but also 2.5x the price ($200 compared to $500). The L2 has quite a few better specs compared to the U2.
    2014 F150 Limited -> Factory HU programmed for 4v outputs -> Helix DSP.2 -> Alpine PDX-V9 -> SI M25 in Valicar Stuttgart Pods, Rear SB17's, Sub BM MKV's in MTI BOX. Alpine PDX-F6 -> Peerless SLS 6.5", SI M3 in Valicar Stuttgart Pods

  6. Back To Top    #26

    Re: Some Advice

    i dont think we have any UK dealers for the audiofrog would they work well in the alloy pods or factory location would it be down to try and see? i looked at the morel CCWR254 i think i seen them reviewed with the gs25 on another forum

  7. Back To Top    #27

    Re: Some Advice

    Quote Originally Posted by SQMax View Post
    i dont think we have any UK dealers for the audiofrog would they work well in the alloy pods or factory location would it be down to try and see? i looked at the morel CCWR254 i think i seen them reviewed with the gs25 on another forum
    Skipton Car Radio are their UK distributors.

    Seems trial and error is the best way forward unless you buy a couple of options and sell what doesn’t work.


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top