Getting started on my rings for the sub and front midbass. The sub ring will stay MDF. I will translate the front rings to HDPE for a weather proof door install.
Ge0
Getting started on my rings for the sub and front midbass. The sub ring will stay MDF. I will translate the front rings to HDPE for a weather proof door install.
Ge0
Scanspeak - Dynaudio - Helix - Bose
I got these coming in the mail:
And these sitting ready to be installed for a midbass show down. Who is going to win?
Ge0
Scanspeak - Dynaudio - Helix - Bose
welder was on my short list after I stopped being a poor university student. Gas welder went short-list when I started gunsmithing. TIG just dropped now that my coworker plans to buy one to tig himself a massive copper brew tun for whiskey making
I enjoy making metal stick to metal. Sometimes it almost doesn't look like a disaster, too.
Looking forward to hearing your thoughts on Dyn vs Audison.
So I just got a present from Chris in the mail. Damn these suckers area pretty. Oh, and huge!
Just for a comparison. The MW182 is much larger than the AP8. This photo doesn't seem to capture the difference.
Supposed to have some great weather this weekend. Let's see how far we can get. No if my ResoNix order would ever come in...
Ge0
Scanspeak - Dynaudio - Helix - Bose
What are the white marks on the Audison surround?
And if they are good, I have those Audison's on my list too, for midbass... maybe as high as 1000hz but probably less than that.
Interested in what you think of both of those.
2001 Lexus LS430
Pioneer DMH-2660NEX | Pioneer GM D1004 | Helix DSP.2 | Rockford Fosgate Power T400X4ad | Morel TiW 634Nd | Audison Prima AP1 | Dayton Audio Ultimax UM8-22
Scanspeak - Dynaudio - Helix - Bose
Construction day today. My God I forgot how messy cutting rings was. Saw dust everywhere...
I prefer to transfer my ring patterns to MDF prior to cutting so I can see what the router bit should be doing.
Prior to starting a cut I fix the work piece to a waste backing piece. Here I use 2 wood screws. Double sided tape would work too. But Amazon has not delivered that yet. Wood screws are more secure anyway.
Putting the Jasper Jig to work. A pain in the butt for now. My plunge router has not come in. I need to stop with each pass and manually set depth using this fixed based finishing router:
Here are the cut rings for today. Thunderstorms moving in. Need to cut work short. Need to make remaining rings tomorrow.
This guy makes outdoor cleanup easy:
Much more tomorrow...
Ge0
Scanspeak - Dynaudio - Helix - Bose
Scanspeak - Dynaudio - Helix - Bose
What a great build! Detail level is astounding. There are kids/adults everywhere looking at that last post top picture saying, "Compass? Is it pointing north?"...
Keep up the great work!