Results 1 to 4 of 4

Thread: IB capable 8" or 10" subs

  1. Back To Top    #1

    IB capable 8" or 10" subs

    Looking to build a manifold for 2 IB subs firing through my ski pass in my sedan. Because I am using a manifold, I am limited to 8" and 10" subs. I am following the Qts over .5, lower Fs, rule. Anyone know any subs that fit that bill? I would also like to stay under 300 dollars for the pair. Kicker Comps, a few Pioneers are already on my list. Any others that I should think about?

  2. Back To Top    #2
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,058
    Join Date
    Jul 2013

    Re: IB capable 8" or 10" subs

    What about the NVX VCW 10" - Qts 0.52, Fs 29Hz

    NVX VC Series Manual.pdf
    Are you not entertained?!?!


  3. Back To Top    #3
    Senior Member captainobvious's Avatar
    Real Name
    Steve
    Location
    Pennsylvania
    Vehicle
    2016 Transit Connect
    Posts
    882
    Join Date
    Jun 2013

    Re: IB capable 8" or 10" subs

    More importantly, you need drivers with a lot of xmax. Small drivers typically aren't conducive to IB sub duty because you need a lot of displacement. You may be better off doing a sealed/ported alignment.

  4. Back To Top    #4
    Noob forty5cal1911's Avatar
    Real Name
    Phil
    Location
    Columbia, TN
    Vehicle
    08 AMG E63
    Posts
    16
    Join Date
    Nov 2019

    Re: IB capable 8" or 10" subs

    Go with the Dayton reference HO 10's if you can fit them. Steve is completely right you need as much cone area and excursion as possible. I actually prefer a lower Q driver.

    COMAND NTG 2.0 - Mobridge DA2 > toslink > Helix DSP.2 - NVX JAD 800.4 - Scanspeak R3004 - Scanspeak 10F - NVX JAD 800.4 - Silver Flute W17RC38 - NVX JAD 1200.1 - AE IB10AU

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top