I figured I might as well post this here. It is over on the f150 forums, but you all might appreciate it more. (If you want to look at every iteration go here https://www.f150forum.com/f30/jdunk54nls-build-446724/)
Equipment to date:
Factory HU programmed via Forscan for 4v variable output
Knu Koncept Krystal RCA cables
Knu Koncept 1/0 gauge power and ground
Helix DSP.2
Alpine PDX-V9 (sub(s), tweeters, and rear fill)
Alpine PDX- F6 (Midbass and midrange)
Stereo Integrity 3 way front (TM65 Mkiii, M3, M25)
Valicar Stuttgart pods for M3's and M25's
2x Stereo Integrity BM MKV's (on their way soon, current sub is a 10" JL TW3)
SB Acoustic SB17's for rear fill
A bunch of Resonix CLD (look at his website for the 2014 F150 log for details on the sound deadening)
100% Resonix CCF and MLV
I used the for-11ck harness to connect to the ACM and run wire back to my DSP. I choose to do low level RCA runs.
I then had the Sony system and didn't have the correct connector for it so I decided to cut and solder the wires together. It was Saturday and I needed the truck on Sunday. FYI this fully deleted the Sony system. My sony amp, speakers, and sub sit in my garage now.
This is just a final wrap of electrical tape to over-protect the wires.