I'm glad your happy with your tune
Really wish I could listen to this in person.
A few notes on our "3hr" tune for those following along:
This was the first time I used a remote control app (team viewer) to tune a vehicle. It's pretty straight forward but we were disconnected a couple times for unknown reasons and once was completely my fault because I accidently closed the team viewer window instead of the minidsp plugin window within the remote window. I also, more than once, opened the Dirac app on my own PC instead of in the remote window then spent several minutes trying to figure out why I couldn't connect to the DSP or find the saved files to load
I also took some extra time to explain each step I was performing and why so David knew what was going on. Then we had the vehicle ignition time out on us mid operation a couple times. I think we could have completed the tune more quickly without the extra time these things added.
The other thing that needs to be mentioned is that now that there is a saved set of measurements (and as long as the same listening position and xover points will be used) it will literally only take 5 minutes to connect the Dirac app, load the saved file, adjust the target curve and re-optimize in order to achieve a new "tune".
Of course, the "2 seat" tune will require a new set of measurements. Also, Dirac will attempt to correct tonality, phase, and IR issues for both seats but it will not be able to image the same from both seats. The imaging will be a compromise between the two listening positions unless there is another processor upstream that can perform the appropriate up-mixing for a center channel.