New Build - 2019 JL Wrangler 2 door

[Grinder]

In the interest of science, I could try to reproduce the effect by clicking thumbs down, thumbs up, and thanks for ^this^ post (#250) and see what happens.(?)

[Grinder]

I cannot locate that button, but yes normally I think we can undo it. In a frenzy I lost that undo button. I think I added a second button and then realized the first one was wrong but it will only allows me to undo the second (unthank/thank) button. I'm bad!!
Attachment 9944

Not at all sure, but maybe it's got something to do with settings of this screen. Apparently, default is no boxes checked, as shown below:

Perhaps one or more of ^these^ "postbit" items has been selected on your version of this screen?

[Hillbilly SQ]

That box is starting to make more sense to me now. Can't wait to see it finished and some video of roof flex

[diy.phil]

Hey Grinder, i just enabled/saved all 4 items there but it still looks the same (cannot undo the Thumbs Down). Few hours ago i suddenly saw a Thumbs Up button and hit it too. So now there's both Thumbs Up + Thumbs Down there

[diy.phil]

ok i think i fixed it! I unchecked (undo) every item, until there's totally nothing,... and then carefully checked the 2 items. Thanks everyone!

Awaiting the roof flex video now...

[dumdum]

Yes, the larger volume knob actually makes the system louder. It's science.

The only down side to a larger volume knob, is the increased unsprung weight which slows down the twist velocity when you want to turn it up really fast.

But if you were to cnc the knob to remove excess weight the unsprung weight would be lessened and the velocity would be easier to increase

[DavidRam]

But if you were to cnc the knob to remove excess weight the unsprung weight would be lessened and the velocity would be easier to increase

Lol

I do have a few different CNCed aluminum knobs in my garage to choose from, black and raw... I hate the feel of those cheap hollow knobs that they put on the MiniDSP remote.

Here is the MiniDSP remote in my previous Jeep (built in below the steering column) with a nice thick aluminum knob.

[DavidRam]

I had a minor set back on the sub box:
I was not happy with the way the interior paint came out, so I sanded it all down and repainted by hand, with a brush. Trying to spray paint a clean, even coat in a tight area like that is beyond my skill set.
When it's dry I'll sand it smooth and then brush on a clear coat, like I did with my fancy sub box. I really like how the finish on that one turned out, so I will duplicate it...

[BigAl205]

Just paint it like Mr. Bean...put a large firecracker in a jar of paint, and....

[DavidRam]

Just paint it like Mr. Bean...put a large firecracker in a jar of paint, and....

Hmmm, that'd prolly look better than my paint job!