Page 14 of 40 FirstFirst ... 4121314151624 ... LastLast
Results 131 to 140 of 394

Thread: New Build - 2019 JL Wrangler 2 door

  1. Back To Top    #131

    Re: New Build - 2019 JL Wrangler 2 door

    Quote Originally Posted by DavidRam View Post
    ... Here, the weight of the sub is on these bolts, too ....
    I'm not sure you understand what I'm getting at ...or maybe I'm just overthinking this:

    While the fasteners provide great clamping force, such clamping force alone might not be sufficient to prevent shifting/slippage over time. Alignment pins would help prevent any such shifting/slippage, and thereby preserve long-term shear load capability, in a way that threaded fasteners alone cannot - presuming the use of fully threaded bolts. While carefully selected partial-thread bolts (sized to snugly fit the mounting holes of both the Plexiglass and enclosure panels) would provide both positive alignment (to preserve shear force resistance) and clamping force (and, as such, might well be the most elegant solution), a fewer number of alignment pins (for example, four alignment pins, versus twice as many - or more - alignment bolts) might be a lot simpler to implement.

  2. Back To Top    #132

    Re: New Build - 2019 JL Wrangler 2 door

    Here is my Tonka Toy Jeep! Method Roost wheels & Nitto Ridge Grappler 285/75/17

    2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5

    #TRUMP2020

  3. Back To Top    #133

    Re: New Build - 2019 JL Wrangler 2 door

    oh yah, big tires!!

  4. Back To Top    #134

    Re: New Build - 2019 JL Wrangler 2 door

    Quote Originally Posted by diy.phil View Post
    oh yah, big tires!!
    Yep!! Actually, in this picture they don't look as big, in person they look almost too big... Fortunately, I'll be lifting it 1-2", so they'll look just right with that.
    2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5

    #TRUMP2020

  5. Back To Top    #135

    Re: New Build - 2019 JL Wrangler 2 door

    Very nice! Clean and sharp black and silver. I really like the look of that.

  6. Back To Top    #136

    Re: New Build - 2019 JL Wrangler 2 door

    Quote Originally Posted by Grinder View Post
    Very nice! Clean and sharp black and silver. I really like the look of that.

    Thanks!! That is pretty much going to be the look for the whole Jeep, inside and out.
    2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5

    #TRUMP2020

  7. Back To Top    #137

    Re: New Build - 2019 JL Wrangler 2 door

    I should have the passenger pod installed by tomorrow... Next is the fun part, building the box for the Hutchinson beast!!

    Here are the specs, thanks to JCAudio:

    2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5

    #TRUMP2020

  8. Back To Top    #138

    Re: New Build - 2019 JL Wrangler 2 door

    I'm wondering about the 91.94 Hz F3, which seems awfully high for a vented sub, and given the 33.07 Hz Fb.

    Looking forward to modeling this in WinISD this evening, if only to satisfy my curiosity.

  9. Back To Top    #139
    Noob JCsAudio's Avatar
    Real Name
    John
    Location
    Massachusetts
    Vehicle
    See signature
    Posts
    656
    Join Date
    Aug 2019

    Re: New Build - 2019 JL Wrangler 2 door

    David, I believe the better American made baltic birch that comes in 60” x 60” sheets is 9-ply for 3/4” plywood. The 11 ply stuff is probably made in China. Grinder, the F3 point is that high because the response has a peak above that F3 point.

    I just picked up some 7-ply 3/4 hardwood plywood for my box next build.
    Mazda CX5 AF GB10, AF GB25, AF GB60, JL VX800/8i, AF GB12 sealed, Mmats M1400.1

    Ford F150
    AF GB10, AF GB25, JLC5, JL twk88/Pioneer D8604, Mosconi Pico, JBL Club 5501, Sundown SD3-10 ported @ 30 Hz

    Sienna
    AF GB15, Audiofrog GS690, JL twk88/Pioneer D9500F, JBL GTX500, Alpine SWS10 ported @ 31 Hz

    https://www.diymobileaudio.com/threa.../#post-5608901






  10. Back To Top    #140

    Re: New Build - 2019 JL Wrangler 2 door

    Quote Originally Posted by JCsAudio View Post
    David, I believe the better American made baltic birch that comes in 60” x 60” sheets is 9-ply for 3/4” plywood. The 11 ply stuff is probably made in China. Grinder, the F3 point is that high because the response has a peak above that F3 point.

    I just picked up some 7-ply 3/4 hardwood plywood for my box next build.
    Thanks John! Actually, I tried the 7 ply and I found it to be softer and more fragile than the 11 ply. But I'll check it out at my Local lumber yard... I am gonna grab some wood on Tue or Wed (hopefully) and start the box build!! I'm really excited to build this one!!
    2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5

    #TRUMP2020

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top