Page 37 of 59 FirstFirst ... 27353637383947 ... LastLast
Results 361 to 370 of 587

Thread: Sexual intercorsa...

  1. Back To Top    #361

    Re: Sexual intercorsa...

    So the mk2 version of my 3D printed fuse/earth distribution has come off the printer... in reverse I forgot to flip it so the positive was on the side I needed... but the copper bars will just flip over and fit all the same... the mk2.1 version will be printed and finished by now at work, it sure does look pretty and has a mega fuse for the cap bank as well so I can isolate it and three M8 studs for earthing purposes

    i got the offset of the 5mm stud for the midi fuse perfect so it was a good fit for the edge of the copper too!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	2780F6E5-33D4-492F-8B07-5C5A27E61F3C.jpg 
Views:	85 
Size:	108.9 KB 
ID:	15595   Click image for larger version. 

Name:	A5282ACC-F42C-4204-931D-3A898D04A11C.jpg 
Views:	85 
Size:	177.0 KB 
ID:	15596  
    Last edited by dumdum; 04-16-2021 at 01:49 PM.

  2. Back To Top    #362

    Re: Sexual intercorsa...

    I have a 3D printer -
    You are giving me ideas...

    Sent from my LM-G820 using Tapatalk

  3. Back To Top    #363

    Re: Sexual intercorsa...

    Quote Originally Posted by geolemon View Post
    I have a 3D printer -
    You are giving me ideas...

    Sent from my LM-G820 using Tapatalk
    I printed it in petg so it had more stability in car with summer temperatures (even in the U.K.) and also is reasonably strong also I went for 100% fill so it has plenty of body! You still could crush the plastic with an m8 nut and bolt I reckon... but a spring washer and a nylok means it will never come loose...

  4. Back To Top    #364

    Re: Sexual intercorsa...

    It really is awesome -
    Built > bought.
    Every time. Super cool.

    Sent from my LM-G820 using Tapatalk

  5. Back To Top    #365

    Re: Sexual intercorsa...

    So I’ve rewired the dsp to get rid of a relay or two from the old install, I have a small turn off pop that needs to go... if this doesn’t solve it the hybrid is out... I will swap to a gz uranium 2.250sq that ironically I sold one of a few months back

    the new fused distribution is in and works ok, but I need to make a proper display of it with techflex and some different length cables, plus a relay fitted purely for the voltmeter, but for now no relays just incase it’s back emf from relays causing the pop... time will tell on that one, I suspect it’s a ground in the hybrid being slightly off from the zapcos ground so it discharges a very tiny amount of energy that creates the pop

    small changes that took a days work, old rcas were removed, left speaker cables rerouted for mids and tweeters, pictures taken of the rcas (you can’t really miss them!) I also found out I think I’ve killed an rca output on the pioneer, I suspect I’ve shorted the centre pin to the outer on some deadener while I was doing the boot, so the left output is now running from the rear left, but I had to swap the carplay to a lhd so the phone came out of the front right as it was still trying to be fed to the front left in rhd mode, heyho, it’s a solution
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	ED04E5D5-DB2F-46F0-B01D-9F2BF3FCF98C.jpg 
Views:	78 
Size:	248.0 KB 
ID:	15660   Click image for larger version. 

Name:	14443690-6E61-4711-82C3-F36030701C9D.jpg 
Views:	87 
Size:	312.7 KB 
ID:	15661   Click image for larger version. 

Name:	002BE407-596F-4C0A-BB39-ADDED9A21AA2.jpg 
Views:	82 
Size:	109.5 KB 
ID:	15662   Click image for larger version. 

Name:	67233537-219A-411A-B531-60A08D12BAFA.jpg 
Views:	78 
Size:	209.2 KB 
ID:	15663   Click image for larger version. 

Name:	56B88E6F-F519-494B-88E0-02674C2B12E2.jpg 
Views:	76 
Size:	207.6 KB 
ID:	15664  


  6. Back To Top    #366

    Re: Sexual intercorsa...

    Oh and he had a bath I hate cleaning cars!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	15755076-AFB6-499F-90E1-569BCB946EB4.jpg 
Views:	79 
Size:	213.4 KB 
ID:	15665  

  7. Back To Top    #367

    Re: Sexual intercorsa...

    Quote Originally Posted by dumdum View Post
    ...I will swap to a gz uranium 2.250sq that ironically I sold one of a few months back...
    Ugh, the sell it then decide you actually want to use it maneuver. I hate that one. I've done it twice in the last year.

  8. Back To Top    #368

    Re: Sexual intercorsa...

    Come to me depth to stage… the stage is inside the pillar, but it’s deceptive, it’s a lot deeper than previous so it is actually wider
    It
    previous depth to stage was 8-10” before the base of the screen, and the width was 8-10” inside the corner of the screen… now the depth to stage is at the bottom of the screen and the width of the pillars

    it seems narrower but due to the depth it’s actually a bigger stage with more space now I think…

    time and a tune will tell how it sounds… the pics are the passenger side 1.5l pod, which with the Sb acoustics ceramic 12cm is aapprox a Q of 0.707

    for now the passenger side tweeter is in front of the midrange on the lip which fixes to the cross piece

    the plan is a large grill to cover from pillar to pillar with the centre vent also cut out of it for the windscreen demist function…
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	18A41510-310F-479D-865F-593FC98A468F.jpg 
Views:	71 
Size:	216.1 KB 
ID:	15695   Click image for larger version. 

Name:	90B6C44C-13EE-4CAB-9B4B-2C78625A42EA.jpg 
Views:	82 
Size:	227.0 KB 
ID:	15696   Click image for larger version. 

Name:	8FC71F67-5342-4C54-990D-0448CEB33AE5.jpg 
Views:	83 
Size:	163.5 KB 
ID:	15697  
    Last edited by dumdum; 05-06-2021 at 05:52 PM.

  9. Back To Top    #369

    Re: Sexual intercorsa...

    So the enclosures did the trick… kinda! The slimmer enclosures 1.5l vs 2+ have more control over the ceramics, and this is good, the motion of the cone is controlled more and excursion seems less with less cutting of the low end…

    The kinda bit… so I made both enclosures fit behind the cross car strengthening beam… the issue is the part of the pod on the inside on the passenger side was causing a reflection and the edge of stage on the passenger side was 6-8” inside the corner of the screen, granted the stage is further away, so the stage was likely as wide as before, but I had experienced the drivers side in a previous incarnation with a driver under the corner of the screen and it was at the driver…

    soooo in typical me style I changed my plan and made the left side from the old base and cut new 50mm sides and made a second passenger side enclosure to put the drivers under the corner of the screen but with the enclosure up the side of the pillar… basically the driver is now on a baffle that is a minimal amount of intrusion from the side of the car

    result the stage is now how I remember the opposite side being… aka at the driver give or take with a massively deeper stage, win win, it’s all marks in Emma, you get points for width, points for depth to stage and hopefully it will make depth of stage better also, the end result is width of the old pods and depth to stage of the new pods, now I have to work out how to hide the drivers so judges and others don’t get any sense of where the drivers are

    from a quick dirty tune of mids to midbass and tweeters to mids I am a happy bunny, no eq and a centre that is exceptional and pretty nailed on! Current crossover is 2.2khz and the tweeters cope with excitable levels just fine!

    both tweeters are literally on axis and have a very similar perceived location to the respective mids, this makes the centre a piece of cake to get right! I need to work some eq magic on the tweeters and mids with eq, but that will only improve what is already a very dynamic and lively setup
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	F17820A3-A668-449F-B3FD-B0B03428FE6E.jpg 
Views:	85 
Size:	188.7 KB 
ID:	15707   Click image for larger version. 

Name:	297DA5AB-54B4-461E-98F9-15DE5AED283E.jpg 
Views:	87 
Size:	167.8 KB 
ID:	15708  
    Last edited by dumdum; 05-07-2021 at 06:19 PM.

  10. Back To Top    #370

    Re: Sexual intercorsa...

    I feel like you'll never have front speakers

    This is why I set up a fake car in my basement to play with this winter.

    Curious, since you have the ability...
    Have you tried that location, but angled to fire them a bit more towards the rear view mirror, or slightly more on axis than "up", or both?

    I feel like you should be able to steer your image around from that spot.

    Sent from my LM-G820 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top