Made to order grills, rings, Equipment for mounting speakers. Power distributor.

[ToNasty]

I believe that at such small distances
and thickness of a brass plate 8mm - the location of consumers will not affect

It wont affect it at all. The main power run is maybe 8 feet. If that. Max draw if I were to wire all amps down would be 220 amps. But I did a draw test already and all 3 amps how I'm using them only draw about 120 amps. Which is nothing

Sent from my SM-G975U using Tapatalk

[Alexander612]

Maybe someone is interested:
housing and mounting additional sensors on the steering column:



I can make any configuration and sizes.

[Alexander612]

Looks very nice and well made the only thing I would have done different if it was mine was to not have the engraving done and just used a label printer. Also the highest draw should be as close to the Batt connection as to not draw power down the buz bar.

Yes . UV printing on plexiglass is possible. But it costs more

[Alexander612]

Comrades, is anyone interested in custom amplifiers? Makes my friend in Russia.
I can throw off photos and specifications. For myself, I chose them for a long time and put them on a two-way front. Before that there were brax, sinfoni, steg - not that .
Amplifiers are intended only for high-quality amplification -sq. --- Not for pressure !!!

[ToNasty]

Comrades, is anyone interested in custom amplifiers? Makes my friend in Russia.
I can throw off photos and specifications. For myself, I chose them for a long time and put them on a two-way front. Before that there were brax, sinfoni, steg - not that .
Amplifiers are intended only for high-quality amplification -sq. --- Not for pressure !!!

I'm always interested in seeing what else is out there

Sent from my SM-G975U using Tapatalk

[Alexander612]

The prototype of the circuit is an excellent home amplifier, adapted for 12-16 volts and slightly modified - like this: http://noosfera-amps.ru/ru/

[Alexander612]

Today, two models are being assembled: single-channel units and two-channel ones. These amplifiers are bare terminal amplifiers. Without filters and designed for processor systems.

[Alexander612]

Aluminum radiator - it can be black (painted), anodized in black, anodized in aluminum color or nickel plated.






In the photo there are 3 single-channel blocks (without cases).

[ToNasty]

Priced and specs for the car amps please. Always looking to try something new

[Alexander612]

Priced and specs for the car amps please. Always looking to try something new

A little later I will send a full alignment!