Page 1 of 5 123 ... LastLast
Results 1 to 10 of 49

Thread: Altima Coupe SQ build

  1. Back To Top    #1
    Clueless lowcel's Avatar
    Real Name
    Bruce
    Location
    Charleston, WV
    Vehicle
    4Runner & Altima Coupe
    Posts
    172
    Join Date
    Apr 2017

    Altima Coupe SQ build

    I purchased this car a couple of months ago with full intentions of keeping it pretty much stock and just using it for a daily driver and to carry my road bike. I guess my plans have somewhat changed since then.







    I have lowered the car with Tein Street Advance Z coilovers and mounted 18” Niche Vosso M204 wheels. I’ve also had it tinted 5% all around with a strip on the windshield.


    On the interior so far all I’ve done is installed a Kenwood DDX-9903S head unit and I’ve applied sound deadening to the doors, roof, and trunk areas. I still need to do the cabin floor. I’ve used a mix of Resonix tiles (amazing stuff) and Sound Barrier MX4 along with some Stinger that I had laying around.









    The plan is to continue using the vehicle as a daily driver along with hitting a few MECA shows and competing in the stock class.


    Component list:


    Kenwood DDX-9903S
    Apple iPad mini
    Mosconi DSP-AMAS2 or AMAS 96K
    JL TwK 88
    Morel MPS 5.950
    Morel MPS 4.400
    Morel Primo 12 sub
    Morel Elate 6.5” midbass
    Morel 3.5 midrange
    Morel MT230 tweeters


    I've got a budget of $1,000. That should be more than enough.

  2. Back To Top    #2
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: Altima Coupe SQ build

    That is an awesome setup my friend!

    Mucho Morel... yummmmmm...
    Are you not entertained?!?!


  3. Back To Top    #3
    Owner BigAl205's Avatar
    Real Name
    Alan
    Location
    Hayden, AL
    Vehicle
    2018 Chevy Silverado Z-71
    Posts
    5,699
    Join Date
    Feb 2013

    Re: Altima Coupe SQ build

    Lookin good, Bruce!

  4. Back To Top    #4
    Clueless lowcel's Avatar
    Real Name
    Bruce
    Location
    Charleston, WV
    Vehicle
    4Runner & Altima Coupe
    Posts
    172
    Join Date
    Apr 2017

    Re: Altima Coupe SQ build

    Not much progress this weekend but I did get the power wire ran through the firewall. I was really dreading this job.


    The only place I could find to run it was in a tight little area behind the driver’s side strut tower. I could barely get my hand back there.








    I had to cut through the rubber grommet from the inside of the vehicle. I could get any leverage to cut from the engine bay.





    Most of the components will be delivered today. Hopefully I will be able to make some progress next weekend.
    I've got a budget of $1,000. That should be more than enough.

  5. Back To Top    #5
    Clueless lowcel's Avatar
    Real Name
    Bruce
    Location
    Charleston, WV
    Vehicle
    4Runner & Altima Coupe
    Posts
    172
    Join Date
    Apr 2017

    Re: Altima Coupe SQ build

    Some new goodies arrived yesterday.


    I've got a budget of $1,000. That should be more than enough.

  6. Back To Top    #6
    Owner BigAl205's Avatar
    Real Name
    Alan
    Location
    Hayden, AL
    Vehicle
    2018 Chevy Silverado Z-71
    Posts
    5,699
    Join Date
    Feb 2013

    Re: Altima Coupe SQ build

    Is this your wife's car?

  7. Back To Top    #7
    Clueless lowcel's Avatar
    Real Name
    Bruce
    Location
    Charleston, WV
    Vehicle
    4Runner & Altima Coupe
    Posts
    172
    Join Date
    Apr 2017

    Re: Altima Coupe SQ build

    Quote Originally Posted by BigAl205 View Post
    Is this your wife's car?
    Nope, my daily driver. She has a 2017 Altima. I’m stuck with the old cars.


    Sent from my iPhone using Tapatalk
    I've got a budget of $1,000. That should be more than enough.

  8. Back To Top    #8
    Owner BigAl205's Avatar
    Real Name
    Alan
    Location
    Hayden, AL
    Vehicle
    2018 Chevy Silverado Z-71
    Posts
    5,699
    Join Date
    Feb 2013

    Re: Altima Coupe SQ build

    Did you ever put a system in hers, or am I still to refer to you as "asshole"?

  9. Back To Top    #9
    Clueless lowcel's Avatar
    Real Name
    Bruce
    Location
    Charleston, WV
    Vehicle
    4Runner & Altima Coupe
    Posts
    172
    Join Date
    Apr 2017

    Re: Altima Coupe SQ build

    Quote Originally Posted by BigAl205 View Post
    Did you ever put a system in hers, or am I still to refer to you as "asshole"?
    I’m still an asshole.

    However, had I put one in hers I would still be an asshole.


    Sent from my iPhone using Tapatalk
    I've got a budget of $1,000. That should be more than enough.

  10. Back To Top    #10
    Owner BigAl205's Avatar
    Real Name
    Alan
    Location
    Hayden, AL
    Vehicle
    2018 Chevy Silverado Z-71
    Posts
    5,699
    Join Date
    Feb 2013

    Re: Altima Coupe SQ build

    Fair enough. I'm looking forward to what you do with this one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top