This is my build log for a system install on the 2020 Camry that I'm going to buy when we return from our January to March escape from winter trip to warmer climes. This project will probably take a long time. So far I've chosen the Car PC system that I will install instead of an aftermarket head unit, (Khadas) the sub woofer, (Scanspeak) mid basses, (Scanspeak) tweeters (Wavecor) and DSP (MiniDSP C-DSP 8X12 DL). Not sure which amplifiers yet. A friend has a 2019 Camry and the interiors of the 2019 and 2020 are similar enough that I was able to plan a good part of the install by using his car as a template. This morning I laid up the pods for the Wavecor TW030WA04 no flange tweeters I will be using, the pods are fibreglass and I used a bit of expanded metal to make grills for them. I'm mostly happy with how things turned out. I was going to paint the pods basic black but instead I shot them with a layer of grey primer, then flat black with black texture for the top coat...not sure I'm sold on the texture and I'll probably put a coat of grey over it to better match the interior of the car I'm buying. The pods look a lot better in person than in the photos' and I'm going to lay up a trim ring to cover the edges and fare it into the mounting position.
Sorry for the hinky quality of the photos but I had a hard time getting my tablet camera to focus on the pods.
https://solen.ca/products/speakers/h...ers/tw030wa04/