Toyota Venza

[JP Fabrication]

Here is my friend's sons' Venza. I've know him since he was born, now 23. I will be doing his install as a favor for him so this build will take awhile. It depends on my little free time and the boy's wallet so he can buy the equipment. It will be done in stages.

(The sub enclosure was finished August '13)

First stage is fabbing the sub enclosure for a singe Alpine Type R 12"









Four 5/16" nutserts install to secure enclosure





Fiberglass cured and trimmed to desired shape



Mocking up baffle



Threaded inserts installed into baffle

[JP Fabrication]

Fleece stretched



Resined and layered up





Cleaning up the edges



Smoothed with Rage Gold, Marglass/resin/filler mixture lined the inside of enclosure



Deadened entire inside

[JP Fabrication]

Focal Black Hole Stuff

[JP Fabrication]

Almost 2 years later, back at it.

He picked up an AudioControl LC6i and as ALPINE MRX-M110 (1100 Watts x 1 into 2 Ohms). The LC6i is behind the dash.
I welded a "cup" to the battery hold down to support the 1/0 to the fuse holder, water tight strain relief through the passenger side firewall, installed 1/4"-20 rivnuts to bolt the amp board to.







Remote bass knob to the left of the steering column, and a quick trim panel for the amp to wrap it up for now.












And that's it for now. Be back in a year or two for the 4ch and speaker install

[BigAl205]

Outstanding work as always...thanks for sharing

[keep_hope_alive]

Nice enclosure.

[cadaver]

you and bing are my two favorite perfeshonal installers, ever.

[JP Fabrication]

you and bing are my two favorite perfeshonal installers, ever.

Thanks. Bing is one of favorite too.

Bing=professional

Me=hobyist

[BigAl205]

We need Bing over here *hint hint*

[cadaver]

yeah, you saying youre a hobbyist is like saying the pope aint catholic!