Re: Justin Zazzi's tuning companion for room eq wizard
If I set Linkwitz 24 DB 80 HZ high pass on the spreadsheet for my woofer in a 2way setup, does it matter if in my dsp I actually have to set a Buttwerworth 36 db at 100hz to hit the target curve? Is it just phase I would have to worry about then? Thanks !
Re: Justin Zazzi's tuning companion for room eq wizard
Quote:
Originally Posted by
Crusher
If I set Linkwitz 24 DB 80 HZ high pass on the spreadsheet for my woofer in a 2way setup, does it matter if in my dsp I actually have to set a Buttwerworth 36 db at 100hz to hit the target curve? Is it just phase I would have to worry about then? Thanks !
Electrical settings do not matter. It is only if you hit the acoustical curve, so you did exactly what you should be doing. Don't change a thing :)
Re: Justin Zazzi's tuning companion for room eq wizard
Re: Justin Zazzi's tuning companion for room eq wizard
To get the near the 80 80 acoustic crossover for my sub and mid bass, in my dsp I have had to set mid woofers to 100 LW and my 2 small 6.5 boxed subs (Helix MATCH PP 7E-D) to 60 LW. Is this right or do you think something wrong with my setup somewhere? Seems like a big electrical gap. Also this small sub has a MASSIVE peak at 50 hZ and takes a lot of cutting to get down to the target line and I do feel like a have lost a too much bass at the moment so might turn it back up in that area a tad. Sounding good though
Re: Justin Zazzi's tuning companion for room eq wizard
Quote:
Originally Posted by
Crusher
To get the near the 80 80 acoustic crossover for my sub and mid bass, in my dsp I have had to set mid woofers to 100 LW and my 2 small 6.5 boxed subs (Helix MATCH PP 7E-D) to 60 LW. Is this right or do you think something wrong with my setup somewhere? Seems like a big electrical gap. Also this small sub has a MASSIVE peak at 50 hZ and takes a lot of cutting to get down to the target line and I do feel like a have lost a too much bass at the moment so might turn it back up in that area a tad. Sounding good though
you are good if it matches the acoustical curve. My electrical settings are all over the place in my car and home theatre.
Re: Justin Zazzi's tuning companion for room eq wizard
cursedbat8448, I hope you found the answer you needed? Looks like you removed your question so I assume you did!
Re: Justin Zazzi's tuning companion for room eq wizard
Just in case people with virtual channels want to try this dip from the jazzi curve, I did 3.1khz, Q=1 and -3db from a flat tuned Sq preset which made it very much more pleasant when I give it some death :) thanks Justin!
Re: Justin Zazzi's tuning companion for room eq wizard
Re: Justin Zazzi's tuning companion for room eq wizard
Hi,
If i overlap xover or gap, would the formulas still work?
thank you.
Re: Justin Zazzi's tuning companion for room eq wizard
Quote:
Originally Posted by
Kb86
Hi,
If i overlap xover or gap, would the formulas still work?
thank you.
Yes, but what is your reasoning for doing such?