Rockford Fosgate PLC not working
I have a Punch 300 mono for a single 10" sub. I've had it for a while but never installed it. I have the PLC2 installed in the console. The rest of the amplifier works very well and the light on the level control comes on and changes color; however, there is no change in the level when the knob is rotated. I'm well past the return period and don't want to waste another $30 if the circuit in the amp is bad.
Does anybody know how to troubleshoot without another unit of either available to swap?
Re: Rockford Fosgate PLC not working
First, the plc needs to be in the propper port, the " in " port.
Second , the xover contols need to be set to " LP " ( low pass ).
Third, the punch dial needs to be set above zero.
Double check all these things and report back.
Re: Rockford Fosgate PLC not working
Thank you! It was the crossover. I'm using a dsp so I had it set to pass.
Re: Rockford Fosgate PLC not working
Re: Rockford Fosgate PLC not working
Quote:
Originally Posted by
Lurch
First, the plc needs to be in the propper port, the " in " port.
Second , the xover contols need to be set to " LP " ( low pass ).
Third, the punch dial needs to be set above zero.
Double check all these things and report back. ��
I have the punch 1000 mono and my plc2 isn’t working either I have it in the “in” but I don’t see a low pass on my amp it works fine when I have the plc2 switched off on the amp but nothing when it’s switched on also the light is working on the remote so I know There is a connection….
Re: Rockford Fosgate PLC not working
The Rockford tech support guys are pretty helpful. They help me all the time!
Try giving them a call.
https://rockfordfosgate.com/support/
Re: Rockford Fosgate PLC not working
Quote:
Originally Posted by
Justin Zazzi
thanks man!!! I’ll try to reach out to them after work today!