If you could run either which would you choose based on sound quality? They would be getting 100 watts and crossed at 2500 l/r24.
Printable View
If you could run either which would you choose based on sound quality? They would be getting 100 watts and crossed at 2500 l/r24.
15 for 2 way, 10 for 3 way
Sent from my SM-G975U using Tapatalk
Not trying to hijack your thread but I had a similar question. of the two below 1" tweeters (Brands not important) is there anything below that really distinguish these two? Does one stand out as "better" than the other in a 3 way configuration?
Attachment 12318
I get that's what they are designed for, what I'm asking is if there would be a sound quality difference if the 15s were used in a three way.
ZR800, gb40, gb15 for example.
Would need more measurements (distortion) to say which separates one from the otherQuote:
Originally Posted by Cutaway
Sent from my SM-G975U using Tapatalk
The only difference is that the gb10 will be able to play higher without beaming. But you are getting into 10,000hz+ before it becomes an issue.
Also, you have to realize that for this to make a difference, all other things that you do have to be done properly. So eq done right, phase 100% lined up, levels matched, install angle done right, etc. If you don't have that stuff done, then going from the gb15 to a gb10 isn't going to make anything magical happen.
Attachment 12323
I have both and what SkizeR said.