SKODA SUPERB A-Pillars HAT L3SE+JBL C660GTI by LBaudio
Hello guys,...its been a while I last posted here,...so let me introduce one of the latest projects - a-pillars for Skoda Superb that will house Hybrid Audio Technologies L3SE and JBL C660 Tweeter.. Pillars have open back and are vented under the dash. Finish is Two tone paint - Texturized mat black and hi-gloss black metalic.
here are some pics of the progress and final product:
drivers used for project:
https://i.imgur.com/YqZBICJ.jpg
https://i.imgur.com/9TJ2MtU.jpg
https://i.imgur.com/VxeTSpO.jpg
fabrication of speaker rings
https://i.imgur.com/9nVqeB0.jpg
https://i.imgur.com/s6nfcNv.jpg
https://i.imgur.com/1HPK1wB.jpg
Tweeter cups were drawn in 3D software and3D printed to preserve originals
https://i.imgur.com/jMesIYy.jpg
https://i.imgur.com/9TJ2MtU.jpg
dash was taped off with ALU tape
https://i.imgur.com/V4pWwNj.jpg
base for pillars was shaped and attached to the original A-Pillar. Template was made also at this point
https://i.imgur.com/GLYTaxI.jpg
https://i.imgur.com/jgM74Vz.jpg
https://i.imgur.com/50EfP8P.jpg
Testing of positions and angles
https://i.imgur.com/7OcwYIS.jpg
https://i.imgur.com/Y6LkNAj.jpg
rings attached to the pillar
https://i.imgur.com/MpQ4aPU.jpg
https://i.imgur.com/P8EvmWu.jpg
Re: SKODA SUPERB A-Pillars HAT L3SE+JBL C660GTI by LBaudio
Re: SKODA SUPERB A-Pillars HAT L3SE+JBL C660GTI by LBaudio
test fit in the car
https://i.imgur.com/YeG8emU.jpg
https://i.imgur.com/3uAGXFT.jpg
https://i.imgur.com/SsTn1Fu.jpg
a guide coat applyed and a ton of sanding ahead
https://i.imgur.com/hetP1dp.jpg
at this point those were ready for primer - sorry no pics
Re: SKODA SUPERB A-Pillars HAT L3SE+JBL C660GTI by LBaudio
Re: SKODA SUPERB A-Pillars HAT L3SE+JBL C660GTI by LBaudio
Re: SKODA SUPERB A-Pillars HAT L3SE+JBL C660GTI by LBaudio
What process did you use to texture the grain portion of the pillars?
Excellent work!
Re: SKODA SUPERB A-Pillars HAT L3SE+JBL C660GTI by LBaudio
Thanks Chris!
Painter set his paint gun to achieve this texture.
Re: SKODA SUPERB A-Pillars HAT L3SE+JBL C660GTI by LBaudio
Thanks Lojze.
I’ve tried SEM texture in the past, but I wasn’t able to get the results I wanted.
Sounds like you and I use a similar method to replicate that OEM grain texture.
Ive found that just using an “overspray” pattern works best.
Thanks again!