Stevens Audio MB8 as mids for a 2way active
I'm considering slapping the Steven's Audio MB8 in an sedan door with the right tweeter of course. This will be an SPL setup and I'm wondering if anyone has made these work 2way and how it sounded?
Any other feedback would be appreciated.
https://www.facebook.com/10225841351...5408394204672/
Re: Stevens Audio MB8 as mids for a 2way active
I was considering using these in a 3 way system a month back but could not get them to fit. IMHO if your primary goal is SPL these should work fine in a two way system. They will play up into a typical tweeters freq range. They are definitely loud enough with a 96dB sensitivity.
Just don't expect perfect imaging. Off axis response will get sketchy beyond 1K.
Ge0
Re: Stevens Audio MB8 as mids for a 2way active
Thanks for the feedback. I'm not expecting perfect imaging,...just loud, clear music that doesn't sound bad. What did you end up going with for your setup?
Re: Stevens Audio MB8 as mids for a 2way active
Quote:
Originally Posted by
Maxmil982
Thanks for the feedback. I'm not expecting perfect imaging,...just loud, clear music that doesn't sound bad. What did you end up going with for your setup?
I have two options I am looking at. These will be dedicated midbasses in a 3-way system:
These are what I really feel are going to make this system kick azz. Dynaudio MW182 10" midbasses. I hope to buy these within the next 2 weeks
https://www.macanforum.com/attachmen...82-png.231135/
In the mean time a few folks here convinced me to try something a little less conventional. AudioFrog GS690 6x9's. I have these arriving today:
https://www.macanforum.com/attachmen...39-jpg.231136/
Both solutions will fit with custom cut spacer rings. The Frogs are a tad bit higher sensitivity. The Dyn's have a much larger cone area. It should be an interesting comparison.
Ge0
Re: Stevens Audio MB8 as mids for a 2way active
Quote:
Originally Posted by
Maxmil982
Thanks for the feedback. I'm not expecting perfect imaging,...just loud, clear music that doesn't sound bad. What did you end up going with for your setup?
The Stevens MB-8 should be perfect for what you are looking for. They are cheap enough to buy that it is almost a no-brainer just to try out. If you don't like them you could easily re-sell them on these forums within a few days.
Do the 2ohm version if you can. You get a sensitivity of 101dB. They can hit over 125dB each within their safe operating limit
Ge0
Re: Stevens Audio MB8 as mids for a 2way active
Quote:
Originally Posted by
Ge0
The Stevens MB-8 should be perfect for what you are looking for. They are cheap enough to buy that it is almost a no-brainer just to try out. If you don't like them you could easily re-sell them on these forums within a few days.
Do the 2ohm version if you can. You get a sensitivity of 101dB. They can hit over 125dB each within their safe operating limit
Ge0
I agree. The only issue you’ll have is a single 12” sub with normal excursion will not keep up with those output levels.
Re: Stevens Audio MB8 as mids for a 2way active
Quote:
Originally Posted by
dgage
I agree. The only issue you’ll have is a single 12” sub with normal excursion will not keep up with those output levels.
The OP said he was building an SPL system. I'm certain he is not targeting a single 12" sub :)
Ge0
Re: Stevens Audio MB8 as mids for a 2way active
Quote:
Originally Posted by
Ge0
The OP said he was building an SPL system. I'm certain he is not targeting a single 12" sub :)
Ge0
From his other post in the Ask an Acoustic Engineer thread, he mentioned a single Sundown SA-12 sub. So thanks for agreeing with me that the single sub won't keep up. :)
Re: Stevens Audio MB8 as mids for a 2way active
Quote:
Originally Posted by
dgage
From his other post in the Ask an Acoustic Engineer thread, he mentioned a single Sundown SA-12 sub. So thanks for agreeing with me that the single sub won't keep up. :)
Oh. OK. I'm man enough to say I was wrong. I stand corrected.
Ge0
Re: Stevens Audio MB8 as mids for a 2way active
Quote:
Originally Posted by
Ge0
Oh. OK. I'm man enough to say I was wrong. I stand corrected.
Ge0
So disappointing you don’t do hours research before responding to a post. Geez man, unacceptable. Lol. All good man. I’m usually the one that doesn’t keep up with related posts but I just happened to respond in the other thread before seeing his post here.