A-pillar mounting for Aurasound Whisper...
Home Forums DIY Audio Discussion Technical & Advanced Car Audio Discussion
Grill solution for Aurasound Whisper ?
Jump to Latest
Follow
1 - 6 of 6 Posts
Hi.
I'm about to start putting some Whispers in my a-pillars.
I'm not competing, so I don't need something to physically protect them, but I want something to reduce their visibility to the thieving scum!
I've seen Justin Zazzi's pillars (I have the same mkiv Golf) and want to do something similar, but as I don't need the metal grill, could I speed things up by sliding a tube over the end of the Whispers that extends enough to clear xmax, then covering with acoustic cloth?
I know there is a risk of diffraction, I also have read the a round over would help prevent that diffraction, but the articles I've read about that suggest a big round over for the frequencies we're talking about (probably down to around 1k, maybe a little lower if testing shows the Whispers can keep up with my midbass)
So do I bother with a round over at all, or just try it with the tube?
Thanks in advance
2 Attachment(s)
Re: A-pillar mounting for Aurasound Whisper...
Attachment 9395Attachment 9396
Something like the above (assuming I worked out the pics!)
Re: A-pillar mounting for Aurasound Whisper...
If the round over is unnecessary or impossible for midrange frequencies, should I make the tube as close as possible to the surround of the Whispers or bigger?
If I use a bigger tube, can I line the edge of the tube to smooth some diffraction?
Can I extend the tube at the back of the driver to block some reflection from reaching the windscreen?
Am I massively over thinking this!?
Re: A-pillar mounting for Aurasound Whisper...
Re: A-pillar mounting for Aurasound Whisper...
I replied in the Justin zazzi thread
Re: A-pillar mounting for Aurasound Whisper...
I replied in the Justin Zazzi thread that I replied here.
: )