Oh ok. Much better :)
I'm blind!
Printable View
Oh ok. Much better :)
I'm blind!
Whoa high roller... that's enough for a dozen boxes!!
Lol! Hardly... This box alone took 16 of them.
https://i.postimg.cc/C558DRNc/IMG-20...-163624504.jpg
Working on the kick panels...
Factory opening:
https://i.postimg.cc/Yq5Jb844/IMG-20...-143229046.jpg
Rough cut:
https://i.postimg.cc/zXbsC4fZ/IMG-20...-164603815.jpg
Test fit... Bueno!
https://i.postimg.cc/t4F8fPPB/IMG-20...-152558666.jpg
The grill is too close (touching), but I will trim the inside of it and bow it out a bit with some heat...
https://i.postimg.cc/8k08rTNm/IMG-20...-165504775.jpg
Nothing too exciting... I sealed off the insides with cld the best I could and also added polyfil for good measure.
Then I covered the exterior with SonicBarrier (cld, ccf combo). I had to trim the inside of the grill panels to give the speakers a little more room, and then added cld to it as well.
https://i.postimg.cc/pVcsy28Y/IMG-20...-121650246.jpg
https://i.postimg.cc/8PFt6qm8/IMG-20...-131125507.jpg
I forgot to post this pic... I used some FrostKing foam weather stripping to seal the speaker against the grille.
https://i.postimg.cc/kXVrPLmj/IMG-20...-114948721.jpg
What... behind the M pedal? :p