Printable View
This picture is a dramatized example. Make a template and secure it to the part you want to modify, use a template bit and cut away. Rough cutting is advised.
http://i133.photobucket.com/albums/q...psc3kqdfdy.jpg
http://i133.photobucket.com/albums/q...psxvujlkpt.jpg
Do you cut/remove the vinyl first?
Jay
The panels I was showing are just ABS, but for any wrapped surface, you need to disassemble it at the seams... there are many ways to do that and it could be an entirely different thread. In addition to taking a part the panel you will gently pull the upholstery off/back. I use steam or a heat gun to assist. I really should do a decent write up of some of these things someday :pout: