Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
Hey Guys!
Im starting with new personal SQ build in Alfa Romeo GT.
Equipment list:
Source:
- undecided, probably modded Clarion HX or Pioneer ODR as CD transport + digital player or tablet
Front system
- Midbas - 2 pairs JBL C660 GTI in ported doorpanel enclosures
- Midrange - Hybrid Audio Technologies L4SE (optional JBL 400 GTI)
- Tweeter - JBL TC 25 Titanium
Subs:
- 2 x JBL W15 GTI (probably in sealed enclosure due to space limitations)
Processor:
-Helix DSP Pro
Amps:
- Brax X2000 and X2400
-JBL/CROWN BPX2200.1
Cables:
Acessories: Audison fuse blocks, Brax voltmeters, Brax IPC1F + 2 x 2F, Helix Power Station
DLS, Dietz twisted and shielded, QED Silver Anniversary bi-amping, Kimber, Esoteric audio.
Damping
- Silent coat
A couple of pics of car:
https://i.imgur.com/1cXbSHY.jpg
https://i.imgur.com/ekznSwV.jpg
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
I started with build of a-pillars
rings were cut on CNC and then chamfered behind the driver cutout and also in front.
https://i.imgur.com/o2WhWJm.jpg
https://i.imgur.com/As3PzjN.jpg
https://i.imgur.com/sGpUnDj.jpg
https://i.imgur.com/SQrDF10.jpg
https://i.imgur.com/xBxvSsK.jpg
https://i.imgur.com/H69p3gB.jpg
T-nuts were added
https://i.imgur.com/B51diWh.jpg
Terrter will be held by neo magnets - 4 pc for each tweet
Before start, rings were soaked with poliester resin. This asure that bond with filler and MDF will be as strong as possible and wont crack where two materials meet.
https://i.imgur.com/hPmLyTG.jpg
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
Original upholstery material was stripped down from pillars. Pillars were sanded, drilled a bunch of holes in and covered in three layers of rowing/mat and trimmed.
https://i.imgur.com/2MHPf5S.jpg
taped off back side of pillar
https://i.imgur.com/WPgh4hW.jpg
after fiberglass was applied
https://i.imgur.com/9IzK5gx.jpg
back side of pillar will recieve additional layer of fiberglass to create a Sanwich of Fiberglass/ABS/Fiberglass
a part of pillar at the bottom is without fiberglass applyed
https://i.imgur.com/RQ8cbAN.jpg
https://i.imgur.com/Nz9xVwF.jpg
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
Next task was to mold together this bottom part and pillar
https://i.imgur.com/dOEOn0W.jpg
https://i.imgur.com/fKoS0BZ.jpg
https://i.imgur.com/Fxy1UbW.jpg
A mix or resin and filler with strands were used to make milkshake which was used to "glue" this two parts together
https://i.imgur.com/HZDxoea.jpg
https://i.imgur.com/cZkWtwA.jpg
Large opening on the pillar was created to obtain enough unobstructed air-flow for midrange to vent under the dash. All original pillar fastening spots were preserved
https://i.imgur.com/oEtDBVd.jpg
https://i.imgur.com/zWagk8J.jpg
Rings positioned and secured in place
https://i.imgur.com/6qg4z03.jpg
https://i.imgur.com/KugfFDH.jpg
https://i.imgur.com/wlszajo.jpg
https://i.imgur.com/HBdZPW5.jpg
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
Re: Alfa Romeo GT - SQ build - HELIX/HAT/JBL GTI/BRAX/CROWN by LBaudio
test fit in car - basic shape is done, now I need to make them symmetryc and smooth
https://i.imgur.com/UQ8Pv13.jpg
https://i.imgur.com/IeWQRYn.jpg
https://i.imgur.com/oNuqKAZ.jpg
https://i.imgur.com/h7Nalz8.jpg
https://i.imgur.com/9pPBgVH.jpg
This is where Im at at the moment,... Will post new pics as I progress