Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Alexander612
I believe that at such small distances
and thickness of a brass plate 8mm - the location of consumers will not affect :)
It wont affect it at all. The main power run is maybe 8 feet. If that. Max draw if I were to wire all amps down would be 220 amps. But I did a draw test already and all 3 amps how I'm using them only draw about 120 amps. Which is nothing
Sent from my SM-G975U using Tapatalk
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Maybe someone is interested:
housing and mounting additional sensors on the steering column:
https://i.ibb.co/0Z9d0ct/P91224-152029.jpg
https://i.ibb.co/8MwJjwr/P91224-152118.jpg
https://i.ibb.co/pwKsLTN/P91224-152126.jpg
I can make any configuration and sizes.
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Transitman
Looks very nice and well made the only thing I would have done different if it was mine was to not have the engraving done and just used a label printer. Also the highest draw should be as close to the Batt connection as to not draw power down the buz bar.
Yes . UV printing on plexiglass is possible. But it costs more :)
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Comrades, is anyone interested in custom amplifiers? Makes my friend in Russia.
I can throw off photos and specifications. For myself, I chose them for a long time and put them on a two-way front. Before that there were brax, sinfoni, steg - not that :).
Amplifiers are intended only for high-quality amplification -sq. --- Not for pressure !!!
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Alexander612
Comrades, is anyone interested in custom amplifiers? Makes my friend in Russia.
I can throw off photos and specifications. For myself, I chose them for a long time and put them on a two-way front. Before that there were brax, sinfoni, steg - not that :).
Amplifiers are intended only for high-quality amplification -sq. --- Not for pressure !!!
I'm always interested in seeing what else is out there
Sent from my SM-G975U using Tapatalk
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
The prototype of the circuit is an excellent home amplifier, adapted for 12-16 volts and slightly modified - like this: http://noosfera-amps.ru/ru/
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Today, two models are being assembled: single-channel units and two-channel ones. These amplifiers are bare terminal amplifiers. Without filters and designed for processor systems.
https://i.ibb.co/Y8Nt9fK/IMG-20200103-WA0009.jpg
https://i.ibb.co/jL0RBgP/IMG-7194.jpg
https://i.ibb.co/3yXTC56/IMG-7207.jpg
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Priced and specs for the car amps please. Always looking to try something new
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
ToNasty
Priced and specs for the car amps please. Always looking to try something new
A little later I will send a full alignment!