Jay upside down your plate reminds me of a guy on another site.
Printable View
Jay upside down your plate reminds me of a guy on another site.
It was Jacob Brown. He has it on a euro style plate on his V6 Civic. I didn't get that one, but I'm considering it. lol
Jay
sllywhtboy. Greg. Riddler. All names I've seen recently on another forum. lol
Before I ever posted anything . . .
Anywhere , I'd always turn around when someone said: Hey ... Asshole ! ! ! [TBI's] ?
I remember his screen name on DIYMA, but this is where I saw it:
https://live.staticflickr.com/65535/...31a417a4_z.jpgJacobplate by Jay McGraw, on Flickr
Jay
So, end of last year (IIRC) I decided I wanted to rebuild my sail panels. So, I traded my existing pods to Richard Hall for his GB10 mounting hardware....
and then nothing happened. I've had them attached to the factory sail panels with industrial strength velcro-ish stuff. Well, I finally thought I'd start working on them,
since I'll want to compete once the weather warms up.
I went out to the car with my digital caliper and measured the diameter of the tweeter body and the outer ring. Inner: 43.9mm Outer 49.9mm
While I measuring, a friend of mine (who happens to be my AF dealer) called and when I stepped away to answer the phone, the door closed on the tweeter, between
the door and the dash and crushed the grill (and the dome). Luckily, after I removed the grill, the dome popped back out and the grill was easily repairable, but
my luck with damaging AF speakers is holding. Sigh.
Anyway, I was looking to see if I could find a plastic tubing that could serve as the basis for my new pods. On Amazon, I found acrylic tubing 50mm OD and 44mm ID, 10" long x 2.
It arrived today, and if it weren't for the allen head screws it would be perfect. So, a little work with a file (or heat) and I think I'll have a good start...Yay.
Jay
just the luck :)
Well, I made a change. I pulled my Acoustic Elegance IB12AU-4's and replaced it with a Stereo Integrity SQL12D2.
The box isn't finished (appearance wise, I have some ideas.) I wanted to try it out before I finished it off.
The box design is basically the box design that Jason Carter designed, but adjusted to fit in my trunk better.
2.2cu ft, tuned to 22Hz. Double 3/4" face, Steve Meade TCR-1 terminal cups.
https://live.staticflickr.com/65535/...6f222fbf_z.jpg
https://live.staticflickr.com/65535/...03fc01ec_z.jpg
https://live.staticflickr.com/65535/...bd7462a2_z.jpg
https://live.staticflickr.com/65535/...22be822e_z.jpg
I'm also thinking of switching up amps, but my plan would work better with a 2ohm midbass. Only ones I can really find are
Stevens Audio. Anyone have any experience, or other options?
I paid the car off last month, so I'm considering an update of the system.
Jay