Re: Altima Coupe SQ build
Re: Altima Coupe SQ build
Re: Altima Coupe SQ build
Nice work on the a-pillar with bondo. Looks easier to work with than fiberglass. Will keep that in mind.
Re: Altima Coupe SQ build
Quote:
Originally Posted by
jrwalte
Nice work on the a-pillar with bondo. Looks easier to work with than fiberglass. Will keep that in mind.
Thanks. I used fiberglass as a first layer to fill in all the holes. After that was bondo since it really didn’t have to be that thick.
Sent from my iPhone using Tapatalk
Re: Altima Coupe SQ build
What brand connectors are those?
EDIT: I found them...AEC ARP-4044
Re: Altima Coupe SQ build
Quote:
Originally Posted by
BigAl205
What brand connectors are those?
EDIT: I found them...AEC ARP-4044
Same plastic end, but different barrel... I looked too, but couldn’t find any with the grooves cut around the base, very similar style end though, if not the same with a different barrel
look a very compact plug compared to the reans I used for my home brew RCA’s... the only downside I see to those is the lack of shielding present on the run between plugs... however I can honestly say I’ve never picked up noise in an install bar once or twice when I had... ironically... a damaged rca lead or a blown pico fuse on a pioneer 👍🏼 I will however be knocking some up exactly like those with silver plated copper to see if I can hear any difference to my van Damme/rean combo I currently have kicking about 👍🏼
Re: Altima Coupe SQ build
Re: Altima Coupe SQ build
If the glue is freezing , heat is necessary or doing it over is an option ?
Re: Altima Coupe SQ build
Quote:
Originally Posted by
Queef
If the glue is freezing , heat is necessary or doing it over is an option ?
It seemed to work okay. There weren't any really complicated pieces. These panels aren't as critical as others will be.
Re: Altima Coupe SQ build
Bruce, you sure are a Morel fan. I am glad that they have been so good to you.