Re: BigAl205's 2015 Ford Explorer XLT
Just deaden the hell out of those doors. I'd recommend using Don's butyl rope on the backside of that door skin as well where all of those separate pieces are joined together. Put a good layer or two of cld on it as well and some foam between anything that could touch or rattle.
Re: BigAl205's 2015 Ford Explorer XLT
Jeez man, you could damn near do a glass enclosure between the card and the door. LOL!!
3 Attachment(s)
Re: BigAl205's 2015 Ford Explorer XLT
Quote:
Originally Posted by
Babs
Jeez man, you could damn near do a glass enclosure between the card and the door. LOL!!
That's sorta what I'm thinking. Imagine something along these lines
Attachment 4285 Attachment 4286Attachment 4287
Re: BigAl205's 2015 Ford Explorer XLT
Quote:
Originally Posted by
captainobvious
Just deaden the hell out of those doors. I'd recommend using Don's butyl rope on the backside of that door skin as well where all of those separate pieces are joined together. Put a good layer or two of cld on it as well and some foam between anything that could touch or rattle.
I was pleasently surprised, all mating parts already have some kind of insulation between them, like a wide Tesa tape
Re: BigAl205's 2015 Ford Explorer XLT
So, removing the OEM speaker revealed disappointment, the window motor is in the way
http://www.caraudiojunkies.com/galle...4b49820-me.jpg
also there is only about 2" depth between the edge and the glass
http://www.caraudiojunkies.com/galle...85cf0a6-me.jpg
and there wasn't much in the way of depth behind the mid/tweeter pod
http://www.caraudiojunkies.com/galle...e3baaa4-me.jpg
but there was quite a bit of depth as it curves away
http://www.caraudiojunkies.com/galle...9dc96bf-me.jpg
http://www.caraudiojunkies.com/galle...13ce109-me.jpg
sooo...this was the not-so-good news...
Re: BigAl205's 2015 Ford Explorer XLT
Re: BigAl205's 2015 Ford Explorer XLT
Re: BigAl205's 2015 Ford Explorer XLT
I put the panel back in place and put the Peerless in just to see how it sits.
http://www.caraudiojunkies.com/galle...3190a53-me.jpg
Here's how the OEM speaker fits
http://www.caraudiojunkies.com/galle...618f70a-me.jpg
I think I'm going to have to cut a few inches off the bottom of the speaker cutout to allow the 10 to inset just a tad.
Re: BigAl205's 2015 Ford Explorer XLT
That's gonna go right in there.
Re: BigAl205's 2015 Ford Explorer XLT