Re: 2017 Chevy Spark build
Needs the filth cleaned off but I'm finally done with that mess. There's 2 ato fuse holders along side of the factory positive cover, that's why there is the 2 zipties around it. One for LC7i & other for expansion https://uploads.tapatalk-cdn.com/201...aaae547175.jpg
Sent from my Pixel using Tapatalk
Re: 2017 Chevy Spark build
G.T.O. (the auto turn on feature) for the LC7i won't work for me. Comes on everytime the doors are opened & I'd prefer keyed power I mean. So one more wire to run lol
Sent from my Pixel using Tapatalk
Re: 2017 Chevy Spark build
Never got my soundskins rings in.. guess that's not all bad or I'd have had the drivers side trim back in & would have had to pull it to run an ignition wirehttps://uploads.tapatalk-cdn.com/201...31cfdfe91f.jpg
Sent from my Pixel using Tapatalk
Re: 2017 Chevy Spark build
& props to them for at least sending expedited at this point. Not their fault, but still sucks
Sent from my Pixel using Tapatalk
Re: 2017 Chevy Spark build
Recheck wiring diagram or run wire from fuse box (a wye connection from fused side of wire)use 12 volt test light probe.
Re: 2017 Chevy Spark build
No heated seats so I was able to jack that circuit easily
Sent from my Pixel using Tapatalk
Re: 2017 Chevy Spark build
I got impatient & tossed in the components, LC7i, & 4 channel amp till soundskins rings get here. Could not take the silence or lack of window switches any longer lol
That being said these little Kenwood amps definitely get hotter than I'd like. Running gains at min on amp & using Audiocontrol gains, gets toasty just sitting in the open on a piece of mdf pretty fast
Sent from my Pixel using Tapatalk
Re: 2017 Chevy Spark build
Finally got the soundskins rings today. Made quite a difference in mid-bass response. Did all four doors, & I sealed them up with a layer of Noico deadner on the inner skins.. after I told myself I wouldn't lol the silver under the moisture barrierhttps://uploads.tapatalk-cdn.com/201...88b7da4f76.jpg
Sent from my Pixel using Tapatalk