Not yet
Printable View
Not yet
Well, it turns out I ordered the wrong memory, and it isn't compatible. After checking the compatibility list in the manual, I found the G.Skill Ripjaws at Amazon that looks to get good reviews. I could have bought it $10 cheaper at Newegg, but with Amazon Prime, it will get here Sunday (as opposed to Newegg's lame-assed FedEx Smartpost, which would get it here some time in August :nono:).
So, the new memory worked and the PC is working on the bench. The tiny case I was using was just way too tight, so I went with a larger case. It's about 4x the size, but gives me a LOT more room to run stuff and it should run cooler also. Here it is with a temporary 120v ITX power supply.
http://www.caraudiojunkies.com/galle...8335bef-me.jpg
http://www.caraudiojunkies.com/galle...1e64955-me.jpg
http://www.caraudiojunkies.com/galle...6701d16-me.jpg
I also got the replacement ribbon cable in and it works like a charm. I fabbed up an angle bracket to mount the control board at a 90º angle so the cables come straight out the back and to also give support to the cables.
http://www.caraudiojunkies.com/galle...3309d26-me.jpg
http://www.caraudiojunkies.com/galle...644c026-me.jpg
Here's a couple of crappy night time pics of it in use
http://www.caraudiojunkies.com/galle...b17d80e-me.jpg
http://www.caraudiojunkies.com/galle...48a4e41-me.jpg
Wow, that is awesome Mr. Al!
Very cool
Will the larger case fit your build as well.
I'll make it fit somehow ;)
this will help squeeze it in there
http://www.couponaholic.net/wp-conte...ky-intense.jpg
Electrical KY:
https://www.acklandsgrainger.com/ima...1JU21_AS01.JPG
Yellow 77 is the only way to go