Also started with the tweeters.
Attachment 17878 https://www.caraudiojunkies.com/atta...1&d=1663598018 Attachment 17880 Attachment 17881
Attachment 17882 Attachment 17883 Attachment 17884
J.
Printable View
Also started with the tweeters.
Attachment 17878 https://www.caraudiojunkies.com/atta...1&d=1663598018 Attachment 17880 Attachment 17881
Attachment 17882 Attachment 17883 Attachment 17884
J.
Yesterdays work.
Fiberglass body filler, sanding, regular body filler, more sanding.
Only has 80 and 240, need to get some 320 today.
Attachment 17886 Attachment 17887 Attachment 17888
Attachment 17889 Attachment 17890
J.
Weekend progress.
Sanding, sanding and more sanding.
Attachment 17910
Speaker wires ran.
Attachment 17911 Attachment 17912
Attachment 17913 Attachment 17909
Terminating at the dash.
Attachment 17908 Attachment 17907
Attachment 17905 Attachment 17906
J.
Glad to see you back in the game my friend!! Looking fantastic so far!
Not a lot of progress this weekend.
Installed the USB extension in the center console.
The idea behind that is to keep the IPod in there. The right one goes into the Topping D10S, the left one is just 12v, so I hook up the Apple CCK3 into both and the Ipod into the CCK3.
Attachment 17949
Also added the "I dont trust you with my system switch", which cuts the remote wire.
Attachment 17950 Attachment 17951 Attachment 17952
J.
First set of speakers are in. Woot, woot.
The original speakers mounted from the top. Had an idea to mount them from the bottom and make a "waveguide". Made a ring with 1/8" mdf and held it in place with wood tongue suppressors.
Attachment 17992
Used tape to make a mold.
Attachment 17993
Fiberglass body filler.
Attachment 17994
Regular body filler.
Attachment 17995
Covered them with black felt.
Attachment 17996
Speaker mounted.
Attachment 17997
Made the baffle from 1/4" acrylic, used speaker gasket tape on both sides of the baffle and duct seal on both sides.
Attachment 17998
Added some deadener and hot glued everything that could rattle.
Attachment 17999
Covered with speaker grill cloth and into the car.
Attachment 18000
J.
Weekend updates.
Front stage is done.
Attachment 18098
Amp rack wiring.
This is where my OCD shines. LOL.
Used metal/neoprene washers to not mess up the amps.
Attachment 18099
Test fitting the RCA´s.
Attachment 18100
Example of each amp power side.
Attachment 18101 Attachment 18102
Power and ground wires.
Attachment 18103
Into the distro block.
Attachment 18104
Attachment 18105
Wiring under the rack.
Attachment 18106
J.
Very clean!
Yesterdays progress.
Finished the distro blocks mounting surface.
Attachment 18110Attachment 18111
Started reasembling the hatch.
Attachment 18112
Test fitting the amp rack.
Attachment 18113
It will be held in place with threaded inserts rivets into factory holes and bolts.
Attachment 18114
Side panels in.
Attachment 18115
J.
Amp rack in, bolted and wired.
Attachment 18122 Attachment 18123 Attachment 18124 Attachment 18125
And it came alive yesterday for the first time.
Attachment 18126 Attachment 18127 Attachment 18128
J.