7 Attachment(s)
Re: 2-way TQWT floorstanders
2 Attachment(s)
Re: 2-way TQWT floorstanders
At the time where I made these pics I was thinking to put the tweeters on top of the cabinet so I could adjust them to get the voicecoils alligned... After a long period of thinking I decided to use another set of tweeters, since the HS25Vol has no real mounting manner...
I had some stereo-monitors I built a couple of years ago ( build on deema ) with the complete PRS set.. (TS-M7PRS, TS-T3PRS, UD-N2PRS )
So I took out the TS-T3PRS and removed the flange and thought about it to mount them from the inside of the cabinet to get the coils alligned...
I just have pics of the completed cabinets now, but I can tell you it took al long time to come with the idea.... and execute it...
So here are they, painted and ready, waiting to be measured for the last time to adjust the crossovers and hook em on my Sony ES receiver.. ( DIY Bias adjusted so left and right put out exact the same amount of power )
And Analog multichannel input, so if I ever decide to get a MiniDSP, I can hook it up to the multichannel input and no need to buy separate amps..
Attachment 571Attachment 572
Re: 2-way TQWT floorstanders
Wow...those look great. I love the chamfered look.
1 Attachment(s)
Re: 2-way TQWT floorstanders
Thanks, I like that too... Was bored by the normal designs, so I sawed the edges off... :D
These inspired me.. Attachment 573
Scan speak vertigo's
1 Attachment(s)
Re: 2-way TQWT floorstanders
Quote:
Originally Posted by
Fricasseekid
You did that on a table saw? With both a miter and a shallow angle those corners must've been difficult to line up just right! Im guessing thats why you used the body filler?
Excellent craftsmanship!
With this..Attachment 582
The filler is mainly to seal the MDF to reduce soaking of the paint.. Some of it indeed for correction..
Thanks!
Re: 2-way TQWT floorstanders
A circular handsaw? the Makita SP6000K1X
With a alu-rail, the saw slides over the rail.. Adjustable depth, speed, angle... very nice piece of equippment.. :D