-
Small Citroen 2 way
Im doing fresh build for which Im undecided yet so this will be about my small weekend warrior. I will try my best to make decent flow out of this because there was 3 same cars and system was going from one to another with upgrades and changes.
Lets start:
OEM trunk cover was removed together with its clips after which existing holes were bored and sealed with paint. Than I put threaded rivet nuts and make trunk flor out of 15mm constrution BB plywood.
https://uploads.tapatalk-cdn.com/202...0650babcb8.jpg
Paint strpes was actually from factory[emoji2369].
https://uploads.tapatalk-cdn.com/202...4b4e905195.jpg
https://uploads.tapatalk-cdn.com/202...e18e25cd7b.jpg
https://uploads.tapatalk-cdn.com/202...c449638c93.jpg
https://uploads.tapatalk-cdn.com/202...4fb021d366.jpg
-
Re: Small Citroen 2 way
I forgot to ad that everything is done only by me, from drawings and fabrication to installation and upholstery except stitches.
Subwoofer box was initialy built out of BB and after which i transfer to MDF. MDF sounded more pleasant so I stick with it. Subwoofer is DLS Nordica 12i. Suede is real Italian stamped Alcantara.
https://uploads.tapatalk-cdn.com/202...d6a7fa83c8.jpg
https://uploads.tapatalk-cdn.com/202...80f30af0d1.jpg
https://uploads.tapatalk-cdn.com/202...51034e88be.jpg
https://uploads.tapatalk-cdn.com/202...5b6a0512b3.jpg
https://uploads.tapatalk-cdn.com/202...fa12025e0e.jpg
https://uploads.tapatalk-cdn.com/202...beab2c549f.jpg
Sent from my iPhone using Tapatalk
-
Re: Small Citroen 2 way
-
Re: Small Citroen 2 way
OEM door speaker mounts are designed for 13cm/5.25" speakers so I needed to do custom baffles and make cutout in the doors. BB plywood baffles are fully epoxy coated to make them truelly waterproof.
https://uploads.tapatalk-cdn.com/202...dfbb3c4ab4.jpg
Cutout is rust protected and painted
https://uploads.tapatalk-cdn.com/202...ba4f23ed55.jpg
Dissassebled and cutted door trim for upholstery and fittment
https://uploads.tapatalk-cdn.com/202...84ccaade47.jpg
https://uploads.tapatalk-cdn.com/202...22ed1ea43d.jpg
-
Re: Small Citroen 2 way
Doors were fully CLD and CCF/OCF treated. Unfortunately i have only this picture:
https://uploads.tapatalk-cdn.com/202...b5b8b57c22.jpg
Proceeding with custom door baffles;
Bolt types here were only for testing screw inserts and fittment, later I put allen bolts.
https://uploads.tapatalk-cdn.com/202...c2a2eb93ac.jpg
https://uploads.tapatalk-cdn.com/202...80ca241b20.jpg
I wrapped it in a vinyl which is matched to door trim.
https://uploads.tapatalk-cdn.com/202...86b1835d20.jpg
https://uploads.tapatalk-cdn.com/202...200ba4067d.jpg
-
Re: Small Citroen 2 way
-
Re: Small Citroen 2 way
Pillars were made asymetrical. Angles of tweeters in such a way provided the best aucustical symmetry.
Cutting rings out of BB plywood; I would 3d print them but I was rushing....
https://uploads.tapatalk-cdn.com/202...8e3241a9f6.jpg
https://uploads.tapatalk-cdn.com/202...97563b2d46.jpg
https://uploads.tapatalk-cdn.com/202...2779ca74ec.jpg
Wrapped in Alcantara
https://uploads.tapatalk-cdn.com/202...1a73c4f306.jpg
XT30 connectors; because XT60 is exaggeration
https://uploads.tapatalk-cdn.com/202...d1f244d63e.jpg
Finnal picture is going to uploaded later in the build.....
-
Re: Small Citroen 2 way
-
Re: Small Citroen 2 way
-
Re: Small Citroen 2 way