Hi-FiDelity
Hi-Fi Junkie
Product Brand & Model:
Nakamichi PA-2002 High Performance 2/1 Channel Mobile Power Amplifier
Condition of all items:
Used with some light scratches. Includes original box, documentation, feet and mounting hardware, and original AUG Fuse block (no fuse)
Total Price:
$110 + shipping
Description:
I've been sitting on this guy for a long time now and as much as I love this amp I'm never going to use it and it's just a shame to let it sit in the closet.I bought her new in 2005 and she was going to be used in a build with a PA-2004 but those plans fell through. Since I'm goning with a SS REF5.1000 in my current build I have no real use for this amp and I don't really ever see me using her again. The amp does have some minor cosmetic issues (see pics) but over all I'd say she's an 8/10. I haven't powered her on in about 6 years but she was working like a champ last time I ran her and I wouldn't expect any less of this amp, she is the last of the Zed designed and built Nak's and it shows.
Specs:
Minimum Speaker Impedance: 2 Ohm
Total Harmonic Distortion (at rated power, 4 Ohms): < 0.05%
Intermodulation Distortion: < 0.05%
Power Output (4 Ohms): 100W x 2
Power Output (2 Ohms): 200W x 2
Power Output (1 Ohm): N/A
Bridged Power Output (8 Ohms): 200W x 1
Bridged Power Output (4 Ohms): 400W x 1
Bridged Power Output (2 Ohms): N/A
Input Sensitivity: 190mV *-8V
Input Impedance: 22K
Signal to Noise Ratio (minimum sensitivity 22kHz bandwidth filter): 103dB
Stereo Separation (2kHz): 80dB
Power Bandwidth: 5Hz*30Hz
Frequency Response (1W / 4 Ohm): 5Hz-100Hz
Damping Factor (20Hz, 4 Ohms): > 150
Crossovers:
High Pass 28-230Hz
Slope 12dB/octave
2nd Low Pass (channel 3+4) N/A
Slope N/A
Low Pass 33-200Hz
Slope 24dB/octave
Bass Boost at 42Hz: Yes
One-Band Parametric EQ: No
Phase Shift Control: Yes (L +R)
Auto Bridging: Yes
Manual Bridging: No
Line Output: Yes
Remote Bass Level Port: Yes
Protection:
Short Circuit Protection Yes
DC Protection Yes
Reverse Polarity Protection Yes
Thermal Protection Yes
Thermal Foldback Yes
Power Source:
12v DC negative ground (10 * 15v allowable)
Current Consumption:
with music, 4 Ohms/Channel (avg.) < 20A
with sine wave, 4 Ohms/Channel < 35A
at idle < 1.5A
Dimensions: Width 11-1/4' 284.8mm Height 2-5/8' 66.4mm Length 11-13/16' 300mm
Pics:
View attachment 1645View attachment 1646View attachment 1647View attachment 1648View attachment 1649View attachment 1650View attachment 1651View attachment 1652View attachment 1653View attachment 1654
Nakamichi PA-2002 High Performance 2/1 Channel Mobile Power Amplifier
Condition of all items:
Used with some light scratches. Includes original box, documentation, feet and mounting hardware, and original AUG Fuse block (no fuse)
Total Price:
$110 + shipping
Description:
I've been sitting on this guy for a long time now and as much as I love this amp I'm never going to use it and it's just a shame to let it sit in the closet.I bought her new in 2005 and she was going to be used in a build with a PA-2004 but those plans fell through. Since I'm goning with a SS REF5.1000 in my current build I have no real use for this amp and I don't really ever see me using her again. The amp does have some minor cosmetic issues (see pics) but over all I'd say she's an 8/10. I haven't powered her on in about 6 years but she was working like a champ last time I ran her and I wouldn't expect any less of this amp, she is the last of the Zed designed and built Nak's and it shows.
Specs:
Minimum Speaker Impedance: 2 Ohm
Total Harmonic Distortion (at rated power, 4 Ohms): < 0.05%
Intermodulation Distortion: < 0.05%
Power Output (4 Ohms): 100W x 2
Power Output (2 Ohms): 200W x 2
Power Output (1 Ohm): N/A
Bridged Power Output (8 Ohms): 200W x 1
Bridged Power Output (4 Ohms): 400W x 1
Bridged Power Output (2 Ohms): N/A
Input Sensitivity: 190mV *-8V
Input Impedance: 22K
Signal to Noise Ratio (minimum sensitivity 22kHz bandwidth filter): 103dB
Stereo Separation (2kHz): 80dB
Power Bandwidth: 5Hz*30Hz
Frequency Response (1W / 4 Ohm): 5Hz-100Hz
Damping Factor (20Hz, 4 Ohms): > 150
Crossovers:
High Pass 28-230Hz
Slope 12dB/octave
2nd Low Pass (channel 3+4) N/A
Slope N/A
Low Pass 33-200Hz
Slope 24dB/octave
Bass Boost at 42Hz: Yes
One-Band Parametric EQ: No
Phase Shift Control: Yes (L +R)
Auto Bridging: Yes
Manual Bridging: No
Line Output: Yes
Remote Bass Level Port: Yes
Protection:
Short Circuit Protection Yes
DC Protection Yes
Reverse Polarity Protection Yes
Thermal Protection Yes
Thermal Foldback Yes
Power Source:
12v DC negative ground (10 * 15v allowable)
Current Consumption:
with music, 4 Ohms/Channel (avg.) < 20A
with sine wave, 4 Ohms/Channel < 35A
at idle < 1.5A
Dimensions: Width 11-1/4' 284.8mm Height 2-5/8' 66.4mm Length 11-13/16' 300mm
Pics:
View attachment 1645View attachment 1646View attachment 1647View attachment 1648View attachment 1649View attachment 1650View attachment 1651View attachment 1652View attachment 1653View attachment 1654
