I'm rewiring my power and RCAs and figured it's a good time to ask your thoughts just in case I should setup some extra channels to change up my amplifiers, possibly moving from my current 6-channel to two 4-channel amps where I would bridge the 2-channels for the woofers if I were to update those down the line.
Current front stage:
* Tweeters (1 ⅜" on dash): Hertz Mille Legend 280.3 (90W RMS, 180 Peak)
* Mids (3" on dash): Hertz Mille Legend 700.3 (50W RMS, 100 Peak)
* Woofers (6.5" in doors): Hertz Mille Legend 1650.3 (125W RMS, 250 Peak)
* Pioneer AVIC 8200 head unit
* miniDSP C-DSP 8x12 w/Dirac Live
Possible changes:
* Upgrade the woofer to Hertz ML 1800.3 (200W RMS, 400 Peak)
*Swap everything over to Morel Elate Carbon Pro 63A
* Tweeters: 220W RMS (1000 Peak)
* Mids: 120 RMS (400 Peak)
* Woofer: 180W RMS (1000 Peak)
Need help deciding on a few things:
1) moving from my current 6-channel AudioControl LC 6.1200 amp to two 4-channel amps
2) Any recommendations on the 4-channel amps, either use the two Alpine PDX-F6 amps I have available (150W x 4 @ 4 Ω, 300W x 2 @ 4 Ω bridged) or swap to one of the ones below?
* AudioControl LC-4.800 (125W x 4 @ 4 Ω, 400W x 2 @ 4 Ω bridged)
* Rockford Fosgate Power T1000-4AD (50W x 4 @ 1-4 Ω, 500W x 2 @ 2 Ω bridged)
* Audiofrog A150.4D (100W x 4 @ 4 Ω, 300W x 2 @ 4 Ω bridged
* Hertz Mille ML Power 4 (120W x 4 @ 4 Ω,.500W x 2 @ 4 Ω bridged)
* JL Audio HD Series HD600/4 (150W x 4 @ 1.5-4 Ω, 300W x 2 @ 3-8 Ω bridged)
* Focal FPX 4.800 (120W x 4 @ 4 Ω, 370W x 2 @ 4 Ω bridged)
* Focal FDP 4.600V2 (150W x 4 @ 4, 400W x 2 @ 4 Ω bridged)
* Focal FDP Sport V2 (150W x 4 @ 4 Ω, 400W x 2 @ 4 Ω bridged)
3) Any other options besides two 4-channel amps?
(eg, using one 4-channel amp and one 2-chanel. Note that the Morel Elate Tweeters would need a lot of power (220 RMS), so I could use a powerful 4-channel (200+ RMS x 4) for the Tweeters and Woofers and a 2-channel for the mids)
Sent from my SM-S918U using Tapatalk