Can I run 1, 4 channel amp for both sets or do I need 2 different amps and what rms/amp and watt size/s.
Can I run 1, 4 channel amp for both sets or do I need 2 different amps and what rms/amp and watt size/s.
if we assume your pix are for component sets, and further assume you are running passive crossovers, the answer is yes. Anything up to 150 watts rms per channel
Last edited by Captain Buff; 02-17-2021 at 10:04 AM. Reason: Came across the wrong way.
While I agree with your statement, let's consider the options after opening this thread.
1. Close it and move on.
2. Ask a bunch of questions "that the OP probably doesn’t understand"
3. Answer as best we can with the info given
many chose option 1, this is fine unless nobody answers. That doesn't help the forum or the OP.
I considered option 2, but decided a technical response might be counter-productive. So that left me to answer as best I could with limited info. Hoping it spurs more interest and a learning opportunity.
I'll agree, single four channel would power those perfectly.
Are you not entertained?!?!
Fair enough. It is a fine line to walk...and each can choose how they wish to walk it. My reply was clumsy and poorly worded and did not correctly express my personal concern at the ‘assumption process’ and possible ramifications of that. That’s just me though...my apologies.
Peace