2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5
#TRUMP2020
How do you get the black paint to appear as a single coat without seeing the seams between the individual pieces of wood?
Measure with mics, mark with chalk, cut with torch, grind to fit, sand to finish, paint to match.
Updated Justin tuning sheet (Justin and Erica tuning companion for SMAART and REW)
Do it for them.
What kind of paint? I'm guessing not spray paint.
any specific wood filler?
I ask because I've tried and been really frustrated with the result. I can barely get the wood grain to not show under black paint, let alone get it smooth like you do!
Measure with mics, mark with chalk, cut with torch, grind to fit, sand to finish, paint to match.
Updated Justin tuning sheet (Justin and Erica tuning companion for SMAART and REW)
Do it for them.
2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5
#TRUMP2020
2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5
#TRUMP2020
Measure with mics, mark with chalk, cut with torch, grind to fit, sand to finish, paint to match.
Updated Justin tuning sheet (Justin and Erica tuning companion for SMAART and REW)
Do it for them.
Thanks! That's the part a lot of people miss... The table saw has a rack and pinion, telescoping fence rail/guide that adjusts incredibly precise with the twist of the knob. So, on it's back side is the router's fence with the same adjustability and the dust collector.
You can see the grooves in the top of the cart by the router lift that allows full motion with the fence.
I'll be honest, coming up with the idea of the dual purpose fence was one of the most exciting moments as I was designing this cart in my head! It was one of those moments where you jump out of your chair! Lol
2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5
#TRUMP2020
If you built a full router fence, you could use it to joint edges