It may be able to...remains to be seen. The frequency response graphs from B&G show a big drop at 10K in the horizontal plane, and is very sensitive vertically as well. I'm sure with plenty of EQ it could be done, but I have the NEO3's as well and was able to integrate them into the design so I figured why not? If anything, it should allow me to use a lower crossover point on the neo8S and try to keep them out of the range where they get a little unruly
Here's the data sheet:
http://meniscusaudio.com/images/NEO8...eet%20Rev1.pdf
.