speaker cone materials

[Hic]

Debates will be raging forever about metal vs. paper or various exotic diaphragms.

Aluminum-coated polypropylene
Aramid
C.M.M.D. - Ceramic Metal Matrix Diaphrag
Graphite - injected polypropylene
HCL - HoneyComb-Laminate
Hemp
H.O.P. - Highly Oriented Polyolefine
IMPP - injection-molded polypropylene
IMPP composite - injection-molded polypropylene composite
Kaladax
Kevlar®
Laminated polyester
Mylar
Neoglass
PBO - polybenzoxozole
Pearl polycarbon
Pearl mica
Polycarbonate
Polyethylene
Polyetherimide
PPTA
Pulp - paper
Silk
Silk/polymer composite
Silver film
Titanium
Titanium-coated polypropylene
Textile
Thermalum
UFLC
wood
Woven polypropylene

Some are better for various environments, some reproduce certain frequencies very well and some are less expensive to produce.

Choose one that fits your pocket book and pleases your ear.

The best cone material is only as good as the motor and suspension components it is attached to.

I prefer the sound of paper, it sounds more "natural" to me, paper may be nearly the perfect material for cone construction. The actual make up of most "paper" cones is relatively complex. A top notch paper cone will be hard to beat. I would take a stiff pressed paper cone over any poly cone, for low level detail and transient speed.

Some "state of the art" and highly regarded mainstream stuff uses paper cones. Like the Scanspeak revelator.


Paper cones tend to be more resonant but also more dynamic, but the paper composition can have very large effects on the sound.

Paper is good in woofer and midrange applications, an old classic that doesn't look to go away anytime soon. It is easier to avoid a poor sounding system with a paper cone when the distortion profile of a driver is not measured and taken into consideration.

[subwoofery]

Good read here:
http://www.focal.com/en/content/19-w...-sandwich-cone
and here
http://www.focal.com/fr/index.php?co...ttachment=3976

Sorry if it's a Focal whitepaper but good read nonetheless at least to me lol

Kelvin

[astrochex]

Interesting topic, thanks!

[Hic]

Thanx

[Hic]

Paper or ? ? ?

Scanspeak , are they leading the way with technological advancements ?

[Hic]

The following is present on the higher tiers.

Doing entry-level makes for posting material, not to be confused with the best sounding speakers.

Their sliced paper cones, that they then fill with damping glue, allows for control of one form of distortion, cone break-up.
Add that to a low-loss linear suspension coupled with their Symmetrical Drive and other than XBL2 Technology (Dan Wiggins), you have a mid that will play music very much revealed !

[Hic]

If you have heard them in a vehicle [ any Scanspeak ], what do you remember as far as an impression ?


One of our newest members thinks home audio when it comes to Scanspeak, that works for me, I concur, it is closest to home audio sound !

What did you find when you ran Scanspeak drivers in your vehicle ? Kevin K, erinh, just a couple I think I saw any others ? Bob Ditts, Too !

[Hic]

Testing of 12M [ 4 inch midrange] from 03-16-2015 http://www.caraudiojunkies.com/showthread.php?1230-Scan-Speak-Revelator-12m-4631g00-Review

All in all, still one of the best frequency response sets I've ever seen. There are some dips but by and large, the response is very linear, even beyond beaming and off-axis

[QUOTE]Re: Scan-Speak Revelator 12m/4631g00 Review

I know. I used to run them in the pillars with a scan/alpine some tweeter myself.

/QUOTE]

[Hic]

Scanspeak now part of Tymphany

Peerless was founded in Denmark in 1926. In 2000, Vifa, also founded in Denmark, merged with Peerless to form Danish Sound Technology (DST). In 2005, Tymphany acquired Danish Sound Technology (DST) along with the original Peerless, Vifa, and Scan-Speak brands, engineering, products, and technology.
Since 2005, Peerless transducer technology has been a constant that has lead to our rich audio heritage and success today. We are the world’s only authentic manufacturer of Peerless drivers. Our Peerless audio products have been delivering premium sound for any application, and we have leveraged the Peerless audio technology platform to bring a consistent level of quality to all of our products.
In 2008, Tymphany opened a state-of-the-art, custom-built transducer manufacturing campus in XinXu, China. In addition to Peerless, we’ve seen and built it all — using a wide range of technologies along the way.
We are Peerless — In the case of Peerless audio technology, we’re still leveraging this platform today. We’re glad you love Peerless, because we do too.

Tymphany opened a manufacturing campus in XinXu , China