Results 1 to 6 of 6

Thread: Notloudenuf's Shower stall retrofit

  1. Back To Top    #1
    Noob Notloudenuf's Avatar
    Real Name
    Kendal
    Location
    Eastern NC
    Vehicle
    '02 330Ci & '20 Tacoma
    Posts
    1,449
    Join Date
    Jan 2014

    Notloudenuf's Shower stall retrofit

    First off, this is not my usual DIY project(s). I hired a highly recommended tile person. I did not have the time to learn tile and if I did F up then I'd be out the materials cost TWICE and THEN the labor. DIY just didn't seem right for me for this project.

    The original fiberglass tub surround


    The tearout




    Showerpan and Goboard installation

    https://www.caraudiojunkies.com/signaturepics/sigpic150_2.gif
    2002 330Ci & 2020 Tacoma

  2. Back To Top    #2
    Noob Notloudenuf's Avatar
    Real Name
    Kendal
    Location
    Eastern NC
    Vehicle
    '02 330Ci & '20 Tacoma
    Posts
    1,449
    Join Date
    Jan 2014

    Re: Notloudenuf's Shower stall retrofit

    Waterproofing painted on



    Figuring out the grout lines


    Placement of alcove to avoid tiny pieces of tile


    First bit of tile going up


    Alcove in and waterproofed


    One day of work




    Seat install
    https://www.caraudiojunkies.com/signaturepics/sigpic150_2.gif
    2002 330Ci & 2020 Tacoma

  3. Back To Top    #3
    Noob Notloudenuf's Avatar
    Real Name
    Kendal
    Location
    Eastern NC
    Vehicle
    '02 330Ci & '20 Tacoma
    Posts
    1,449
    Join Date
    Jan 2014

    Re: Notloudenuf's Shower stall retrofit



    Day 2 of tile installation completed


    Grout in place




    Shower valve finisher and shower head in. We also installed a light in the shower. That was greatly needed


    Painted (by me) and shower curtain up




    That's it. This is in the master bath attached to our bedroom. We still have the guest bath with the same style fiberglass tub/surround in it.
    I looked at doors but talking with several people who have them I decided against it for now at least.
    The bathroom is only 60" wide and the toilet sticks out 38" from the wall so it would be a tiny door.
    https://www.caraudiojunkies.com/signaturepics/sigpic150_2.gif
    2002 330Ci & 2020 Tacoma

  4. Back To Top    #4
    Owner BigAl205's Avatar
    Real Name
    Alan
    Location
    Hayden, AL
    Vehicle
    2018 Chevy Silverado Z-71
    Posts
    5,343
    Join Date
    Feb 2013

    Re: Notloudenuf's Shower stall retrofit

    Wow, very nice! I have been thinking about redoing mine as well. How long did it take?

  5. Back To Top    #5
    Noob Notloudenuf's Avatar
    Real Name
    Kendal
    Location
    Eastern NC
    Vehicle
    '02 330Ci & '20 Tacoma
    Posts
    1,449
    Join Date
    Jan 2014

    Re: Notloudenuf's Shower stall retrofit

    The actual working time was 7 days. The total time was 3 weeks. There was a snafu with the tile order and it wasn't here when they/we were told it was here.
    3 days on week 1
    nothing on week 2
    week 3 worked for 4 days
    https://www.caraudiojunkies.com/signaturepics/sigpic150_2.gif
    2002 330Ci & 2020 Tacoma

  6. Back To Top    #6
    Procrastinator beak81champ's Avatar
    Real Name
    Bobby K.
    Location
    Springfield, Illinois
    Vehicle
    2013 Camaro 2SS/RS
    Posts
    797
    Join Date
    Nov 2015

    Re: Notloudenuf's Shower stall retrofit

    Throw a pocket door in there, or a sliding door. You will thank me later! Looks awesome!!!
    Name:  861E2800-1CCA-47ED-9B1D-AC8F5C49C496.jpeg
Views: 1164
Size:  2.15 MB
    Kenwood DDX9903S, Arc PS-8 w/PSC, Arc Audio 1200.6, Helix SPXL1000, Audiofrog GB12D4(2) IB, GB60, GB25, GB10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top