Page 15 of 22 FirstFirst ... 51314151617 ... LastLast
Results 141 to 150 of 214

Thread: 2016 Challenger R/T Plus

  1. Back To Top    #141
    BURNED OUT Hillbilly SQ's Avatar
    Real Name
    Chris
    Location
    Little Rock
    Vehicle
    2016 Ram
    Posts
    1,405
    Join Date
    Nov 2013

    Re: 2016 Challenger R/T Plus

    What are you going to use those adapter plugs for?
    They might say "don't try this at home" but nothing about not trying it at your friend's house.

  2. Back To Top    #142
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,058
    Join Date
    Jul 2013

    Re: 2016 Challenger R/T Plus

    I kinda failed on relaying information about those, huh?

    The FiX 82 has high level (speaker wire) inputs, with two RCA outputs. The Symbilink adapters I purchased, also have high level inputs. Not the typical RCA outputs most have. Easy solution, using those RCA adapters on the Symbilink adapters.
    Are you not entertained?!?!


  3. Back To Top    #143
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,058
    Join Date
    Jul 2013

    Re: 2016 Challenger R/T Plus

    Started on an underseat mount for the FiX 82 and Symbilink adapters:





    Couldn't ask for a much better fit:



    But ummm... ever had a duh huh moment? Measured, and measured, and measured... to make sure it had room under the driver's seat. But never dawned on me to put the seat back into position and remeasure. Of course, not until it was all together.

    After a bit of trimming, we have the sides down where they need to be now:





    Should get most of the wiring uninstalled this week, in order to work on the new harness and connections.
    Are you not entertained?!?!


  4. Back To Top    #144
    Noob Notloudenuf's Avatar
    Real Name
    Kendal
    Location
    Eastern NC
    Vehicle
    '02 330Ci & '20 Tacoma
    Posts
    1,449
    Join Date
    Jan 2014

    Re: 2016 Challenger R/T Plus

    woooooo look at them 45s!!!!!
    https://www.caraudiojunkies.com/signaturepics/sigpic150_2.gif
    2002 330Ci & 2020 Tacoma

  5. Back To Top    #145
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,058
    Join Date
    Jul 2013

    Re: 2016 Challenger R/T Plus

    Quote Originally Posted by Notloudenuf View Post
    woooooo look at them 45s!!!!!
    Well, it's quite easy to get those corners, especially with a 12 inch black Johnson.

    Square.

    Corner Square.

    Johnson CS10 Corner Square.

    With the black powdercoated finish.



    Are you not entertained?!?!


  6. Back To Top    #146

    Re: 2016 Challenger R/T Plus

    Quote Originally Posted by chithead View Post
    especially with a 12 inch black Johnson.
    must... avoid... comments....




    Nice work, man. Hope to see this complete for the NC meet.
    -- SQ is great, but sometimes nostalgia is greater. --


    Follow my blog:
    https://www.erinsaudiocorner.com/

  7. Back To Top    #147
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,058
    Join Date
    Jul 2013

    Re: 2016 Challenger R/T Plus

    More tidbits arriving:



    Are you not entertained?!?!


  8. Back To Top    #148
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,058
    Join Date
    Jul 2013

    Re: 2016 Challenger R/T Plus

    Had some time yesterday afternoon to work on the car a bit. Went from this:



    To this:



    Started pulling all the previous wires in order to go back and clean everything up:



    Also removed the OSHA approved safety coating from the Symbilink cables:



    Took some time to study the trunk, making sure this super idea I had would work, and of course... what looks good on paper, or in your head, doesn't always work so great in reality. There are a lot of little nooks and curves and such in the corners back there:





    Sooooo... had to go with a different plan. Will be simpler, easier to fabricate, and have a higher chance of completion in time for the April meet

    These beauties look pretty good together though:

    Are you not entertained?!?!


  9. Back To Top    #149
    Noob MoparMike's Avatar
    Location
    Houston, TX
    Vehicle
    '15 Dodge Durango R/T
    Posts
    96
    Join Date
    Jul 2014

    Re: 2016 Challenger R/T Plus

    Keep it up man. Making progress!

  10. Back To Top    #150
    Noob Babs's Avatar
    Location
    Asheville NC
    Vehicle
    Civic Si Sedan
    Posts
    717
    Join Date
    Mar 2014

    Re: 2016 Challenger R/T Plus

    Oh Snap!! Nice work coming along man. Go man go!


    Sent from my iPhone using Tapatalk Pro
    2008 Civic Si Sedan
    Build Log
    You measure with REW? Consider donating. I did

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top